118"W 120"H Motorized Remote Control Retractable 3 layer Golf Impact screen Pro

Description: This is a retractable golf simulator impact screen DIY kit. The motor and impact screen are special designed to hold golf ball repeated hit impact force. The DIY kit includes a heavy-duty motor drive kit and a selected length 2 1/2"(63mm) tube CL800-D63 with selected size impact screen fabric. You also may add side protection screens if you need. The drive kit can lift heavy load screen with screen widths extending up to 200". Special engineering structure for heavy load and long span. The motor can be mounted on the left or right side.It can be operated by the remote (includes in the list). With an add-on smart module (sold separately), it also can be controlled with a timer, wall switch, and smartphone or voice-controlled by Google assistant or Amazon Alexa. Brackets and remote control are included in the package. One remote can control both main impact screen and side screens. You can open/close screens at the same time or individually.The impact screen size is 118” wide by 120” high. The tube is 120" long. The screen height is adjustable. The extra length of screen can be wrapped on tube. The assembled kit width is around 122” because brackets and motor take about 2” room. Make sure that you have space of 122”.Note: This is the DIY kit. Factory will cut to the size and sewn the pocket for the bottom weight bar and ready for you to assemble it. It does require some level DIY skill to assemble and install the screens. You may need to hire an installer to do the installation. Make sure that you or your installer read and understand the reference guide and motor manual. FeaturesCompact design with a motor, transmission box, RF receiver, and controller all in one tubeSpecial designed motor brake for holding up high impact force and perfect for golf impact screen and hurricane shutterProgrammable electronic upper/lower positionsStops at any position by pressing "STOP" buttonCan be mounted on ceiling, wall, or any other angled surfaceMotor runs quietly and remains silent on standbyGroup control to run multiple motors up or down simultaneously or individuallyDouble hall feedback sensor for precise positionSafe and reliable with overheat protectionSpecificationsOperation voltage: 120V AC, 60HzOperation power: 200WProtection Class: IP44, Class HRated RPM: 18Rated Torque: 40N.MFrequency: 868MHzNoise Level <45dBPrecise limit switch, repeated resolution <3 ° Maximum load <282 lbs 3-Layer Impact Screen ProGI320W Pro golf impact screen fabric is specially weaved with special polyester yarns in three layers – a white soft layer, a buffer middle layer, and a white hitting layer. The buffer middle layer absorbs impact force exceptionally well and reduces impact noise. The screen can hold the greatest golf ball impact force. FeaturesStyle: special three layers construction to absorb impact ball shotsColor: White. Material Content: 100% polyesterOpenness: light filteringFabric Weight: 14.15 oz/yardApplications Special designed for absorbing high speed golf ball impact force.Great noise cancellation and low bounce backDedicated golf impact screen Package ContentOne tubular impact motor One RF remoteMount bracketsOne set 120" heavy duty aluminum tube and weight barOne piece 118" Wide 120" High 3 layer Golf impact screen pro with sewn pocket for bottom weight barInstruction bookletNote: This listing is for the main impact screen only, the side protection screens sold separately. If you need side protecting screens, please check item 155007522438, 314008297195, 314008300468

Price: 1650 USD

Location: Hudson, Florida

End Time: 2024-03-17T19:52:52.000Z

Shipping Cost: N/A USD