Description: I find it best to slide the shrink tube over each wire and then solder the wire in the the cup just below the crimp area of the tube with as little solder as possible. Crimp the wire over the insulation on the wire and slide the shrink tube over the clip and heat shrink it onto the clip. Caution: Using too much solder wont allow you to slide the the tube over the clip. You can also shorten the clip if desired by breaking off the crimp portion leaving the cup, and repeating the above. I am offering from a smoke free environment, this high quality, new Cardas tonearm rewire kit.This kit includes: 1. Cardas multi-strand wire set that is composed of their finest ultra pure, oxygen free copper, insulated with PTFE. 2. Five cartridge clips (only four are needed). The contact area of cartridge clips are flashed gold over nickel, and have a contact resistance of .01 ohms. They are are compression type clips fitting all modern round cartridge pin sizes from .0492 inches / 1.20 mm to .0531 inches / 1.35 mm. components are RoHS Compliant lead free materials. 3. Four color coded shrink tubes. 4. Also included in this kit is a 33AWG Served natural color Litz wire which can be used for ground if needed. This wire has a nylon wrap for strength, and each of the inner strands is insulated with polyester film. The overall diameter of this Litz wire is .012 inches or .3048 mm. Note: You do not receive the gallery photo of the completed wire set. It is for illustration purposes only. Each individual strand in a single multi strand conductor is coated with enamel which must be removed for tinning. Consideration should also be given on how you will remove the PTFE insulation before your purchase. I have longer continuous lengths, listed, or sets available if you are interested for practice in stripping, or you require a longer lengths. This Cardas 33 AWG wire comes in four color coded twisted wires: Red (right positive), White (left positive), Green (right ground) and Blue (left ground). I have a small piece of painters tape on each end of the wire set to keep it from unraveling. There are no connectors or clips on either end of the wires. Longer Cardas wire sets are listed in my store. 33 AWG CARDAS STRANDED OFC COPPER TONEARM REWIRE SETS AVAILABLE IN MY STORE: Copy and paste, or type the item number into the search block for information.33 AWG CARDAS STRANDED OFC COPPER LITZ NO CARTRIDGE CLIPS GROUND OR TUBES13" or 33.02 cm Item 362575424447 16" or 40.64 cm Item 362575422621 20" 50.8 cm Item 362751982215 24" or 60.96 cm Item 362751989935 30" or 76.2 cm Item 256376910503 36" or 91.44 cm Item 254357031455 48" or 121.92 cm Item 254210119307 72" or 182 cm Item 25637690642633 AWG CARDAS STRANDED OFC COPPER LITZ WITH GROUND, WITHOUT CARTRIDGE CLIPS OR SHRINK TUBE:13" or 33.02 cm Item 36263092101416" or 40.64 cm Item 25421011931020" or 50.8 cm Item 362428192740 24" or 90.26 cm Item 253849149135 30" or 76.2 cm Item 253849154961 36" or 91.44 cm Item 362428197714 48" or 121.92 cm Item 254210119301 72" or 182 cm Item 36467934174733 AWG CARDAS STRANDED COPPER LITZ WITH GROUND, CARTRIDGE CLIPS AND SHRINK TUBES:13" or 33.02 cm Item 253849202382 16" or 40.64 cm Item 254210119308 20" or 50.8 cm Item 254210119311 24" or 60.96 cm Item 362428221568 30" or76.2 cm Item 25384924407936" or 91.44 cm Item 362575421762 48" or 121.92 cm Item 362630921012 72" or 183 cm Item 364073698684 ADVANTAGES: PTFE Insulation has an extremely low coefficient of friction, meaning that it moves freely through the twists, and turns, within, and required by cycling of the tonearm. PTFE also has outstanding chemical and weathering resistance. FEEDBACK: Our goal is to satisfy our customers and earn positive 5 star feedbacks for every item. If you are happy with your purchase, please take a minute to leave us a positive 5 star feedback. If you have any issues with your purchase, please contact us directly using eBay’s message service to resolve the issue so that we can earn your positive 5 star feedback. Thank You FEEDBACK: Our goal is to satisfy our customers and earn positive 5 star feedbacks for every item. If you are happy with your purchase, please take a minute to leave us a positive 5 star feedback. If you have any issues with your purchase, please contact us directly using eBay’s message service to resolve the issue so that we can earn your positive 5 star feedback. Thank You Import duties, taxes, and customs charges are not included in the item price or shipping cost. These charges are the buyers responsibility. At your option please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.nj
Price: 36.95 USD
Location: Evansville, Indiana
End Time: 2024-07-24T14:39:21.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Compatible Brand: For AudioQuest, For Audio-Technica, For BSR, For Crosley, For Dual, For Empire, For Garrard, For Kenwood, For Marantz, For Pioneer, For Pro-Ject, For RCA, For Rega, For Technics, For Thorens, For Sony, For Linn, For Hitachi
Custom Bundle: No
Color: Multicolor
Compatible Model: Tonearm Wire, Tone Arm Cable, Tone Arm Wire
Year Manufactured: Current Year
MPN: Cardas Audio 4X33
Item Length: 16" or 40.64 cm
California Prop 65 Warning: None
Compatible Product Line: 5 x 33 AWG All Litz Wire
Brand: Cardas Golden Ratio Braided
Type: 4X33 AWG BRAIDED
Unit Type: N/A
Capacity: Capable of connecting mono or Stereo connection to Cartridge
Manufacturer Warranty: None
Item Height: .035 or .889 mm
Features: Low Coefficient Of Friction, PTFE Insulation
Country/Region of Manufacture: United States
Unit Quantity: Does Not Apply
Plug Regional Fitment: Does Not Apply
Item Width: .035" or .889 mm
Item Weight: Less Than 1 Ounce or 28. 35n grams
