2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V

Description: 2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260VWe sell energy storage batteries, which can be customized from 1 kilowatt hour to 10 kilowatt hours. To avoid insufficient battery capacity or excessive waste of power generation. The battery capacity is based on the specific use requirements of the load and application scenarios. You can contact us for technical support. thank you! New function: with working time setting, users can use the function of battery peak shaving and valley filling Why we produced the GRID TIE INVERTER WITH LIMITER ?It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated --- because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problemThis is the 2nd generation grid tie inverter with limiter.With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customerrsquos cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting.New upgraded firmware enable battery or solar limiter current and power model.User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter .User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged.Technical Data：Continuous Power Output：1950WPeak Power Output：2000WInput DC Voltage Range：45V ~ 90VPeak power tracking voltage：50V-90VAC Output Voltage Range：190VAC ~ 260VACOutput Frequency：46Hz~65HzStandby Power Consumption：<0.5WTotal Harmonic Distortion：<5%Peak Inverter Efficiency：92%MPPT Efficiency：99%Power Factor：0.99Output Wave Form：Pure Sine WaveMPPT Function：YesOver Current Protection：YesOver Temperature Protection：YesReverse Polarity Protection：YesAnti-Island Protection：YesStackable：YesWeight ( Kg)：6kgDimensions (W x H x D)：434x196x88 mmHow to use the Inverter ?1. Standard Grid Tie Inverter Modelone unit invertermore than 1 unit inverters stackable1.1. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load.1.2. All excess power that is not needed by the load is then exported to the Grid.1.3. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again.1.4. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid.1.5. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid.2. Using Grid Tie Inverter With Limiter Model2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time.2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically.3. Installation of GTIL With Internal Limiter3.1 This installation is not require an additional limiter module,Installation is much easier.Clamp the current sensor cable to the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.3.2 External protective device including dc and ac SPD(Surge protection device),dc and ac breaker,etc is recommended to installed in the system.4.Limiter Setting on the LCD of the inverter:The GTIL include three working mode:Work as normal GTI without power limitation.Work under Internal limiter mode and Work under External limiter mode,Pls make your setting on the LCD and save it,details setting operation,pls read the GTI manual.5 Battery Discharge Power Mode:New upgraded firmware enable battery or solar limiter current and power model.User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter .User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .6 Limiter Module Specification:1. Clamp sensor- Max 100A2. Wattmeter- Max 9999w3. Terminal Block-Max 20A4. Receptacle- max 2000w5. Clamp sensor signal- 5v AC max mA6. DC signal Cable- 5v DC, max mA7.Package:1 x Solar Grid Inverter with Limiter1 x Internal type Limiter clamp with sensor & 2m cable1 x English User ManualShipping Policy:1. Items are usually shipped 1-3 business days after payment has been received.We do not ship on weekends and holidays2.Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.3. Delivery time depends on destination and other factors, it may takes up to 20 days. If you dont receive the item after 30 days, please contact us, well investigate and solve the delivery problem.4.International buyers are responsible for duties and customs fees.We are not responsible for any customs duties or import taxes (if any)5.Buyer from remote area should pay 35 USD more for the remote delivery service.(Only for Business Express )Payment Method:1. Payment methods accepted : Paypal only.2. All major credit cards are accepted through our secure payment processor PayPal.3. Payment must be received within 4 business days of auction closing.4. We only ship to the confirmed address provided by ebay. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.Returns Policy:1.One Year Warranty. Buy with confidence!2. Refund or replacement request is available only requests within a week after parcel received & returning the item as the same condition as received.Please include your eBay ID and brief description of defective problem in your return package.3. Defective situation must be noticed within 7 days after delivery.4. Buyer must pay the return postage for any return reason.In return,we will pay the shipping fee for send it back to you.5.Replacement or refund will be issued after the items are recevied by us in good condition.Feedback:1.We maintain all excellence 5 star DSR and strive for 100% customer satisfaction! Feedback is very important to us. 2.Please do not give us any bad feedback. Or contact us before you open a case. If you can do as we say, we will be very grateful.Please give us the opportunity to resolve any problem.Duties:1.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.2.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up, do not confuse them for additional shipping charges.3.Custom holds and delays vary from country to country and are beyond the control of the seller. Please do not hold us responsible for delivery delays caused by customs related issues. Thank You!

Price: 399.99 USD

Location: CA

End Time: 2023-11-25T03:43:59.000Z

Shipping Cost: 0 USD