Description: EL-50448 Plus TPMS Reset Tool Tire Pressure Monitor Sensor Relearn For Ford & GMLAUNCH Creader VII+ 2.0 OBD2 Scanner ABS SRS Transmission and Engine Code Reader Diagnostic Scan ToolAbout this itemENG/AT/ABS/SRS DIAGNOSES: LAUNCH VII+ 2.0 OBD2 scanner can easily access to the Engine, Transmission, ABS, and SRS to retrieve their DTCs, text or graphic live data stream and other ECU information. Once the detected problems are fixed, you can use this scan tool to clear the DTCs, and then the warning light will be off automatically.ALL 10 OBD II TEST MODES: Equipped with FULL OBDII functions, this OBD2 scanner is not limited to reading and clearing DTCs, but also supports advanced live data stream for focusing on any suspicious or symptom-specific data parameters, as well as O2 Sensor test and EVAP system test for detecting their faults in time to avoid emission problems.WIDE VEHICLE COVERAGE: You can use this OBD2 scanner to diagnose a wide range of vehicles even 12V diesel cars. The Full OBD2 Functions can be used for all vehicles compatible with OBDII & CAN protocols, and the Four Systems Diagnoses can be used for 2006 and newer vehicles. Notice: To confirm the diagnostic compatibility, please contact us via Q&A or email.COMMONLY-USED FEATURES: This OBD2 scanner features “DTC Lookup” – to retrieve detailed DTC definition in seconds; “Automatic Diagnostic Report” and “Data Playback” – to record the diagnostic information automatically and then you can review the report any time; “PC print” – to help print diagnostic report out after connecting with PC.ABOUT LANGUAGE & UPDATE: This OBD2 scanner supports 8 different languages (English, Spanish, French, German, Italian, Russian, Japanese, Portuguese). Notice: The upgrade can be finished with Window-based computer ONLY via the TF card or USB cable. The “Password”, i.e. register code, can be found in “help” application after connecting the tool with PC. From the manufacturerLAUNCH Creader VII+ 2.0 - 2024 New Comprehensive ENG, Transmission, ABS, Airbag Diagnostic Scan Tool What does the LAUNCH Creader VII+ 2.0 obd2 scanner do for you? Warm Notice: If the screen shows "Lib files are not exist!" , this is because the TF card is not inserted properly, or the connection between the diagnostic cable and the car is unstable. Please take the TF card off, re-download the software, and reinsert the TF card into the tool.Please don't register the device on LAUNCH official website. At present, all LAUNCH scanners don't need to go to the official website to register, which can be registered on the device or on the update tool. LAUNCH Creader VII+ 2.0 OBD2 Scanner highlights: 4 Systems Diagnoses: LAUNCH scanner VII+ 2.0 can read/erase generic and manufacturer specific codes, view live data stream and turn off the warning lights in the Engine system, Transmission system, ABS and SRS.Retrives Manufacturer Specific Enhanced Data for Domestic, Asian and European vehiclesFull OBDII Functions: The obd2 scanner features all 10 OBDII test modes, such as I/M Readiness, Live Data Stream (in graphic format), O2 Sensor Test, On-board Monitor Test, etc.User-friendly Design: LAUNCH scan tool VII+ 2.0 has an ergonomic handheld design with 3.5” TFT display, user-friendly button layout, and a wear-resistant housing, for simplicity and durability.Fast and Intuitive Operations: LAUNCH VII+ 2.0 OBDII scanner has a fast and intuitive operation through an easy-to-use interface and responsive operating system.Wide Compatibilities: The vehicle code reader is compliant with all the OBDII protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO14230), and CAN (Control Area Network ISO 11898).Multilingual Built-in DTC Lookup: LAUNCH VII+ 2.0 is equipped with a built-in DTC library combined with multilingual menu, including English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese.Supports data recording and playing back, Graph, record, and replay data in full color.Provides lifetime free online update service.Send and Prints data via PCSupport 8 languages: English, Spanish, French, German, Italian, Russian, Japanese, Portuguese LAUNCH Creader VII+ 2.0 - Comprehensive ENG, Transmission, ABS, Airbag Diagnostic Scan Tool POWERFUL functions: Engine/Transmission/ABS/SRS Systems Diagnostics Compared to other 95% OBD2 scanner in the market, LAUNCH Creader VII+ 2.0 can also work on Transmission System , while many other Same types of Scanners DOES NOT work on Transmission System . For Engine SystemThe scan tool LAUNCH creader VII+ 2.0 can read/erase codes and view live data in the engine system to help you easily determine the cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off warning light to make sure the engine works properly.For Auto Transmission SystemThe OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep the transmission system’s output optimally adapted to the speed and load. Knowing the exact cause of a transmission’s woes means you can get it repaired as quickly as possible and at minimal expense to you.For ABS (Anti-lock Braking System)With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system. It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.For SRS (Airbag)Read and clear fault code in SRS (Airbag) and turn off warning light of airbag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (airbag) to ensure it works fine. LAUNCH Creader VII+ 2.0 - Comprehensive ENG, Transmission, ABS, Airbag Diagnostic Scan Tool 4 in 1 Live Data Stream + 10 OBDII Test Modes In order to give you a real-time overview of the vehicle's working conditions, the Live Data Stream function will present you with up to four vehicle system information simultaneously about working condition of on-board sensors and parts in the form of a data stream or text. This allows you to visualize the vehicle's performance and to determine where the problem lies. Read and Clear DTCs: Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information.Turn-off Malfunction Indicator Light (MIL).Read I/M Readiness Status: Show whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.Read Live Data Stream: Show the information of continuous data stream from vehicle in live graphic (waveform) display.Read Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting.On-Board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.Read Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.EVAP Test for Fuel Tank System (Carbon canister test). LAUNCH Creader VII+ 2.0 - Comprehensive ENG, Transmission, ABS, Airbag Diagnostic Scan Tool How to Register and Update This Scan Tool? (Tips: Free Update for Life-long time) There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable. Step 1: Go to LAUNCH official website (refer to the "User Guide" in the "Product guides and documents "section of product webpage) and click Updating Tool Download icon.Step 2: Download and install the Creader VII+ 2.0 updating tool and launch the program when installed.Step 3: Enter the Product Serial Number (located at the back of the tool), and hit [Upgrade] and enter the register page, type your email address and "Register Code" (check the "Register Code" on the "Help--Tool Information" menu), then hit [Submit].Note: the “User password” is equal to the “Register Code.”Step 4: Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer.Step 5: Reopen the Creader VII+ 2.0 Updating tool, select the updates you would like to preform or click “Select All” and click Download to start downloading.Step 6: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed. Languages Support To shorten the distance between you and us and let you have a better user experience, we’ve 100% localized the interface into 8 languages: English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese.Generate & Print Diagnostic Report After running the diagnosis, the LAUNCH Creader VII+ 2.0 obd2 scanner will automatically save all of the information about the parts working condition, sensor data and freeze frame and you can go through it by viewing the live data stream. If you are confused with result of the diagnostic report, you can share it with your peers, friends or even us for help! Package list LAUNCH Creader VII+ 2.0 Main Unit *1Main cable*1USB Cable*1TF Card Reader*1User Manual*1Carton Box*1 DTC Lookup We have prepared an in-built DTC library for you to search the specific definition of DTCs so that it saves you the trouble to copy-past and google it on PC. PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay ect. payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of selling. Delivery detailsShippingOrder will be shipped within 1 business day after payment confirmed.We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse.From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shippingDelivery time varies from 2 to 6 business days.From our Hong Kong warehouse via DHL or FedEx GroundDelivery time varies from 3 to 5 business days.From our China warehouseFor US buyers, we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .For other countries' buyers, we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).We will ship according to your Ebay address.Please make sure it is correct and include phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.Please include your special requests in eBay note if there is any.Terms of salesBuyer GuaranteeWe assure you that we are a honest and super reliable seller on ebay, any problems can be solved in a satisfing way for you and any loss will not be brought to you as long as you will kindly contact us via ebay message or your private email. Please kindly contact us firstly if your purchasing is in trouble before leaving any bad feedback including neutral and negative feedback and leaving 3 stars or less stars to me on 4 criteria.Return PolicyPlease return the item within 30 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.About us Who We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 100 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details.Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
Price: 99 USD
Location: Walton, Kentucky
End Time: 2024-10-25T01:40:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Manufacturer Part Number: LAUNCH Creader VII+,CRP123,CRP129
🚩Model🚩: LAUNCH Creader VII+ 2.0
OBD Interface: CAN, EOBD, OBD, OBDII
Connectivity: 16-PIN DLC
Supported System: Engine, ABS, SRS, Transmission
Vehicle Type: Passenger Vehicle
Features: Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Warranty: 5 Year
✔️Update: Free Lifetime Update Online
✔️Screen: 4” TFT LCD Display
✔️Voltage Range: 9-18V
✔️Language: English, Spanish, French, German, Italian, Russian
✔️Vehicle coverage: for Ford Honda Toyota Nissan GM Chevrolet VW,etc.
✔️Four systems scanner: Engine +Transmission +ABS+ SRS Airbag
Type 1: Engine Check Tool
Type 2: automatic transmission scan tool
Type 3: anti-lock braking system diagnostic tool
Type 4: airbag diagnostic tool
🎯Advantages 1: ETS,OIL,SAS
🎯Advantages 2: 10+ Languages Support
🎯Advantages 3: ENG,ABS,TCM,SRS
🎯Advantages 4: FULL OBD2 Functions
🎯Advantages 5: Real-time Live data stream
🎯Advantages 6: Diagnostic Report print
🎯Advantages 7: DTC Lookup
🎯Advantages 8: I/M Readiness Status
Similar Models 1: FX2000 NT624 NT520 NT650 NT630 NT510
Similar Models 2: LAUNCH CRP123 CRP123E CRP129E
🎁FREE GIFT: TPMS*1
Accessories: User Guide
MPN: LEPUSOHPDJ3418
Brand: LAUNCH
Type: Scanner Tool
