72CC/52CC Post Hole Digger Gas Powered Earth Auger Borer Ground w/4" 6" 8" Bits

Description: OT-C001-090+OT-C001-091 Specifications Engine: Single Cylinder, 2-Stroke, Air-cooled. Cylinder Capacity : 52cc. Fuel Mix: 25/1. Drill Bits : 4", 6" and 8". Bit Length: 31". Safety: Bit Lock. Power: 1.9w/7500rpm Carburetor with Pump. Easy Starting System (Cord Starter). Centrifugal Clutch. Change Bits Quickly and Easily. Weight : 10.35 Kg. (Without Bit). Horsepower: 2.4 Hp Accessories: 3drill Bits: 4", 6" and 8". SKU：OT-ML-263+OT-C001-091 Mode Of Operation: One Person Or Two People Mixing Ratio: The Ratio Of 93# Gasoline To Two-Stroke Engine Oil Is 25:1 Output Shaft Diameter: 20mm/0.79in Applicable Brill Size: 10cm/4in, 15cm/6in, 20cm/8in Weight: 10Kg/22.05lbs Displacement: 71cc/0.004cu in Maximum Power: 2.3kw Speed: 0-300rpm Fuel Tank Volume: 1000ml/33.82 Oz Product Size71CC/52CC Post Hole Digger Gas Powered Earth Auger Borer Ground + 4" 6" 8" Bits Post Hole Digger Gas Powered Earth Auger Borer Fence Ground Drill Bits 52CC/71CC Please note: If you only choice 52 cc Engine or 71cc Engine,the package without Drill Bit. The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance. Type1:52 cc Engine + 4'' 6'' 8'' Drill Bits Notice：Please Keep the Choke to on Position When the Machine Is in Use!Product DescriptionThis Is a 2-Stroke Gas Powered Auger for Quickly Drilling into the Earth in Order to Set into the Ground: Fence Posts, Poles, Trees, Shrubs Etc. If You Are Engaged in Related Professional Work, You Must Not Miss This Safe, Efficient and Convenient Professional Tool! Key Features· Convenient and EfficientEquipped with a 52cc Gasoline Engine, the Auger Can Be Handled by One or Two People Easily for a Wide Variety of Tasks.• Ergonomic DesignErgonomically Designed, It Has Double Handles. Double Handles Can Help You Operate the Machine More Stably. Two Handles Are Convenient for One-person Operation or Two-person Operation. • Professional Work Three Different Sizes of Drill Bits Help You Work Professionally. Drill Bits of Different Specifications Are Suitable for Using in the Different Environments, and Installation and Disassembly Are Also Very Convenient.• Sturdy and DurableThe Earth Auger Has a Straight Through Gearbox, Unlike Models with a Side Mounted Engine, the Straight Through Design Is Much More Robust and less Likely to Shear Gears.SpecificationsEngine: Single Cylinder, 2-Stroke, Air-cooled.Cylinder Capacity : 52cc.Fuel Mix: 25/1.Drill Bits : 4", 6" and 8".Bit Length: 31".Safety: Bit Lock.Power: 1.9w/7500rpmCarburetor with Pump.Easy Starting System (Cord Starter). Centrifugal Clutch.Change Bits Quickly and Easily.Weight : 10.35 Kg. (Without Bit).Horsepower: 2.4 HpAccessories:3drill Bits: 4", 6" and 8".Extension bar: 12".Fuel Mixing Bottle. Toolkit for Assembly. Type2:71 cc Engine + 4'' 6'' 8'' Drill Bits DescriptionThe post hole digger is easy to operate with a simple manual start system. The package is equipped with three sizes of drill bits can provide more diversified choices for your work. 2.3kw power and a high speed of 0-300rpm can provide more powerful support for it. It can be widely used to install fence posts, install railings, plant trees and many other lawn applications. Key FeaturesHigh-quality Material: The post hole digger made of high-strength alloy steel, aluminum alloy, and metal can withstand impact, extrusion, wear, and other harsh working conditions. Moreover, its painted surface has performance of rust prevention and corrosion prevention, which can effectively prolong the service life of the product. Easy to Operate: The product is designed with a simple fuel delivery system with a manual recoil start, allowing the machine to be pulled and started quickly. The switch is located at the easy-to-grip handle, making operation more convenient and comfortable. Large Fuel Tank: The large capacity (3.38 Oz) visual fuel tank allows you to easily track the fuel level and use it for extended operation. Great Performance: The product's precision drive gears greatly increase torque and improve its wear resistance. It uses a two-stroke engine, stable operation, and fewer parts, so you have a good feeling while also convenient maintenance. Efficient Heat Dissipation: The large grille housing provides excellent heat dissipation, speeding up the engine's heat dissipation for smoother and more efficient operation. Powerful Power: The heavy-duty engine can reach a maximum power of 2.3kw, which can provide a high speed of 0-300rpm for the drill. Highly Adaptable: The 0.79inches diameter output shaft can be adapted to different drill sizes. If required, you can purchase more sizes of drill bits for installation. High Safety: The product's power head is equipped with a safety lock function that effectively prevents accidental triggering to increase your safety of use. DetailsShockproof Rubber Pad: The shockproof rubber pad at the bottom of the power head can effectively enhance the stability of the product when working so that you can better use and operate it. Dual Handle Design: The design of a dual handle can provide you with maximum leverage and stability when working. Three Digging Bits: The package comes with a 4 inch digging drill, a 6 inch digging drill, and an 8 inch digging drill. You can freely choose the most appropriate one for your work.ApplicationThis product is applicable to frozen soil, clay, hard soil, etc. It is very suitable for installing guardrails, installing railings, planting trees and many other lawn applications. SpecificationMaterial: Alloy Steel, Aluminum Alloy, Metal, Plastic, RubberColor: Orange, BlackProcess: PaintingAssembly Required: YesCooling System: Air CoolingNumber of Cylinders: 1Auger Type: BitStarting Method: Manual StartMode Of Operation: One Person Or Two PeopleMixing Ratio: The Ratio Of 93# Gasoline To Two-Stroke Engine Oil Is 25:1Output Shaft Diameter: 20mm/0.79in Applicable Brill Size: 10cm/4in, 15cm/6in, 20cm/8inWeight: 10Kg/22.05lbsDisplacement: 71cc/0.004cu inMaximum Power: 2.3kwSpeed: 0-300rpmFuel Tank Volume: 1000ml/33.82 OzProduct Size: 50*30*30 cm /19.69*11.81*11.81 inPackage Size: 46*37*33cm/ 18.11*14.57*12.99in Package Included1 x Machine 1 x Funnel1 x Oil Bottle1 x English Instruction3x Drill Bits: 4", 6" and 8"1x 12" Extension BarAll Accessories for Installation NotesPlease close the damper before starting the cold machine, and open the damper during normal operation.Before leaving the factory, we added butter to the gearbox. After working for a period of time, please add butter appropriately according to your use frequency.When you are starting, please start quickly. Don't stop when pulling the rope, pull it slowly.Before starting, press the oil bubble several times and check whether there is oil in the oil pipe.When the cold machine starts, please close the baffle first, and then open the baffle for normal operation.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Type 3:(2.3HP)52 cc Engine + 3xDrill Bits Description:The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts,poles, trees, shrubs etc.Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily fora wide variety of tasks.Ergonomically designed, it is accurate, easy to use and economical.Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.With this tool, you will be able to perform professional quality work.The Earth Auger has a straight through gearbox, unlike models with a side mounted engine,the straight through design is much more robust and less likely to shear gears. Technical details:Engine: Single Cylinder, 2-stroke, air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Bits : 4", 6" and 8".Safety: Bit Lock.Power：1.7W/8500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 11.6 Kg. (without bit). Accessories:3 bits: 4", 6" and 8".Extension Bar: 12".Fuel Mixing Bottle.Tool kit for assembly. Type4:52 cc Engine (No Drill Bit) 52CC Gas Earth Auger Post Hole Digger Garden Holing Fence Post Digging Machine Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1 Please keep the choke to on position when the machine is in use! The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical details: Engine: Single Cylinder, 2-stroke, air-cooled. Cylinder capacity : 52cc. Fuel mix: 25/1. Power: 1.9KW/7500rpm Carburetor with pump. Easy starting system (cord starter). Centrifugal clutch. Change bits quickly and easily. Weight : 10.35 Kg. (without bit).Rotational Speed：8500RPM horsepower: 2.4 HP Type5:71 cc Engine (No Drill Bit ) The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bit length : 31" Power：3.2kw Carburetor with pump Easy starting system (cord starter). Centrifugal clutch Change bits quickly and easily Weight : 10.85 Kg. (without bit) Type6:4'' 6'' 8'' Drill Bits only,no Machine 3 bits: 4", 6" and 8". Extension Bar: 12". Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters. Reminder:the Gas Tank of the Pit Digger Has a Vent Hole. If the Oil Is Filled Too Much During Use, the Oil Will Spray out from the Hole. It Is Recommended to Fill 1/3 Full. OT-C001-090+OT-C001-091 Specifications Engine: Single Cylinder, 2-Stroke, Air-cooled. Cylinder Capacity : 52cc. Fuel Mix: 25/1. Drill Bits : 4", 6" and 8". Bit Length: 31". Safety: Bit Lock. Power: 1.9w/7500rpm Carburetor with Pump. Easy Starting System (Cord Starter). Centrifugal Clutch. Change Bits Quickly and Easily. Weight : 10.35 Kg. (Without Bit). Horsepower: 2.4 Hp Accessories: 3drill Bits: 4", 6" and 8". SKU：OT-ML-263+OT-C001-091 Technical Details: Engine: Single Cylinder, 2-Stroke, Air-cooled Cylinder Capacity : 71cc Fuel Mix: 25/1 Bits : 4", 6" and 8" Bit Length : 31" Safety: Bit Lock Power：3.2kw Carburetor with Pump Easy Starting System (Cord Starter). Centrifugal Clutch Change Bits Quickly and Easily Weight : 10.85 Kg. (Without Bit) OT-C001-090+OT-C001-091 Specifications Engine: Single Cylinder, 2-Stroke, Air-cooled. Cylinder Capacity : 52cc. Fuel Mix: 25/1. Drill Bits : 4", 6" and 8". Bit Length: 31". Safety: Bit Lock. Power: 1.9w/7500rpm Carburetor with Pump. Easy Starting System (Cord Starter). Centrifugal Clutch. Change Bits Quickly and Easily. Weight : 10.35 Kg. (Without Bit). Horsepower: 2.4 Hp Accessories: 3drill Bits: 4", 6" and 8". SKU：OT-ML-263+OT-C001-091 Technical Details: Engine: Single Cylinder, 2-Stroke, Air-cooled Cylinder Capacity : 71cc Fuel Mix: 25/1 Bits : 4", 6" and 8" Bit Length : 31" Safety: Bit Lock Power：3.2kw Carburetor with Pump Easy Starting System (Cord Starter). Centrifugal Clutch Change Bits Quickly and Easily Weight : 10.85 Kg. (Without Bit) PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Oct 28, 2024 at 18:53:35 PDT, seller added the following information:

Price: 98.54 USD

Location: Chino, California

End Time: 2024-11-29T02:38:56.000Z

Shipping Cost: 0 USD