AGT 2.7'' Skid Steer Concrete Breaker Attachment Drilling Tools Hydraulic Hammer

Description: Dear customer:welcome to our store! Shipment from Chicago! -❤-------------❤---------------❤----------------❤----------------❤-----------------❤--------------❤---------------❤--------------❤------------❤------------ You can replace the breaker rod with the post driver rod. Technical Details Operating weight: 550 lbs Working pressure: 1600-2500 psi (110-140 bar) Working flow: 9.5-16 GPM (36-60 L/min) Impact rate: 500-900 BPM Impact energy: 600 joule Chisel diameter: 2.7" (68mm) Hydraulic hose diameter: 1/2" Ear spacing - inside: 10.2" (258mm) Ear spacing - outside: 11.4" (290mm) Pin center to center: 8.8" (224mm) Package Dimensions: 50.39" × 24.01" × 23.62" Shipping weight: 870.82 lbs Product Description: The Skid Steer Concrete Breaker, featuring a 2.7" chisel, is perfect for tasks that require both light and medium effort, making it popular among demolishers, landscapers, and those working on construction sites. With the striking power of up to 400-900 Blows Per Minute. 680 Skid Steer Concrete Breaker has Maximized power-to-weight ratio breaking strength The nitrogen-charged operation provides superior braking efficiency Bottom tie rod bolted design provides easy maintenance Tool bushing for quick, easy replacement Quick-change lugging configuration design Solutions to common problems The hammer is not working after the installation Improper bushing replacement. Refit the inner bushing. Make sure to use the original. Quick couplers are installed wrong. Check connectors and replace them as needed. Supply hoses have been reversed. The pressure line from the pump must be connected to the port marked IN. The return line connects to the port marked OUT. Nitrogen pressure is too high, Release nitrogen and recharge as needed. Why does the hydraulic hammer suddenly stop hammering? The backhead pressure is too high. Release nitrogen and recharge as specified. The backhead is filled with oil. Disassemble the back head and replace the seal. The control valve is stuck. Disassemble and clean the valve, and replace the worn valve. Oil flow is not sufficient. Repair the pump, and adjust the hammer valve. Nitrogen Pressure Details AGT Industrial 4 to 7 Ton Excavator Quick Change Hydraulic Breaker Hammer is designed to be simple to use and reliable. 2.7' chisel can handle both light and medium jobs and is widely used for demolition, landscaping, and excavation sites. An impact rate of 400-900 BPM combined with a moil point hammer makes this a versatile and efficient hammer. Hydraulic Operation Includes (2) Moil Point Breaker Bits Includes Nitrogen Bottle (shipped empty) Includes Tool & Charging Kit Includes Hoses Fits Skid Steers Includes Warranty: 1 Year Warranty Offered.We pride ourselves on our customer service, in the unlikely event if you have any concerns please feel free to contact us to resolve any problems before leaving negative feedback. Thanks for your understanding.Notes: Please note that we have 3 brands TOPCAT, MOWER KING, AGROTK, products of these 3 brands are totally exactly the same. Please note that the we will ship the brand at random.Heavy goods are going to be shipped by truck, please make sure that the receiver has unloading equipments or proper methods for unloading before purchasing. Logistics will not responsible for any unloading. l The carrier may changed to your local logistics if you're in remote area. Please contact us via ebay message if ebay shows delivered while you didn't get it. Thanks.Shipping: Your orders will be shipped within 3 working days after you pay. Usually it will takes nearly 10 working days to your place. If you have any needs for local pick up, please feel free to email us for detail information.

Price: 2299 USD

Location: Chicago, Illinois

End Time: 2024-03-05T17:57:53.000Z

Shipping Cost: N/A USD