Anaheim Automation MDC050-050051 Brushless Motor Driver + 24V Servo !Charity!

Description: Excellent condition, guaranteed working pulled from prototype system MDC050-050051 50V 5A servo controller driver Open Loop Operation • 1.5V to 4V External Voltage Speed Control • 5V 10Khz External PWM Speed Control • 2-Quadrant Operation • Hall Sensor Feedback • Short Circuit Protection • Maximum Current Limit Setting up to 5.0 Amps (peak) • Run/Stop, Freewheel and Direction Inputs • TTL-CMOS Compatible Inputs • Compact Size • Screw Type Terminal Block • CE Certified and RoHS Compliant The MDC050-050051 driver is designed to drive DC brushless motors at currents of up to 5A (peak) and 50V. The driver operates in the basic open loop configuration with either 60° or 120° DC brushless motors. The driver is protected against over current (cycle-by-cycle), hall sensor error and under voltage. When an error occurs, a fault light is turned on to notify the user. Included on the driver is an internal potentiometer to control the maximum phase current allowed into the motor and an internal potentiometer to control the speed of the motor. An optional external voltage (1.5- 4VDC) or 10Khz PWM signal (30%-90%) can be used to control the speed as well. The direction of the motor can be preset by the direction control input. Other inputs to the drive include a run/ stop and a motor freewheel input. The freewheel input overrides all other inputs into the driver. Servo motor: BLWRPG093S-24V-3500-R5.224V5.2 gear ratio3500 rpm max speedR5.2 5.18 peak torque 41.6 (oz-in) rated torque 14 (oz-in) The BLWRPG09 Series is a cost-effective Brushless DC gearmotor. These motors were designed keeping the OEM in mind, using state of the art design parameters and low cost manufacturing. This allows Anaheim Automation to offer these quality motors at exceptional prices. This gearmotor includes a planetary gearbox and a brushless DC motor in a compact fully integrated package. The DC gearmotor is a perfect solution for applications requiring high torque or speeds under 500 RPM. The star wound motor comes with integrated hall sensors for closed loop control for velocity applications. If the off-the-shelf gearmotors do no match your application, a motor can be wound or a gearbox can be selected to meet your specific requirements. Anaheim Automation specializes in providing both off the shelf and custom solutions to handle any demanding application

Price: 169.99 USD

Location: Madison, Wisconsin

End Time: 2024-09-17T22:20:39.000Z

Shipping Cost: 0 USD