Description: BullRing #4003 Stainless Steele Raised Fit Tie-Down Anchors for Ford F150, Super Duty, Ranger, Chevrolet/GMC , Dodge Ram Fits Ford Ranger Truck 1998-2012 Fits Ford F-150 Truck 1998-2014 Fits Ford F250 & F350 Super Duty Truck 1998-2016 Fits Chevy Silverado / GMC Sierra 1500, 2500, 3500 Truck 1999-2013 Fits Dodge RAM 1500, 2500, 3500 Truck 1995-2024 Bullring’s are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bullrings retractable anchor points easily install into the stake pockets on top of your bed rails. Simply pop the stainless steel ring up when you want to use it to secure a load, then hit it down flush when you don’t. Our Raised model sits just above the railcap. This Stainless Steel finish provides a classic look, while the nylon border matches the exact grain and color of Ford / Dodge railcaps. Installation on most models is quick and easy, and requires nothing more than a Phillips head screwdriver. Typical install time – Under a minute. *NOTE: Dodge RAM trucks 2009+ require a rail cap trim to install. Each is made from stainless steel for a 1000 lbs capacity and includes our “no bull” Lifetime Warranty. To get the most out of your tie-down anchors, they can be installed in the 6 stake pockets locations of your truck with 1, 2, or 3 pairs. Installation Ford/Chevy/GMC/Dodge RAM 1995-2008: Installation is quick and easy, and requires nothing more than a Phillips head screwdriver. Remove any plastic cap that covers the stake pocket. Use a Philips screwdriver to loosen the two screws in the anchor, so that the steel plate drops down. Place the anchor into the stake pocket at an angle. Pull the anchor ring up, so that the steel plate catches on the metal rail cap below, and tighten down the Phillips screws until they are hand tight (if the plastic railcap is starting to bending/bowing – then it’s too tight). Typical install time – Under a minute. 2009-2024 – REQUIRE RAIL CAP TRIM TO INSTALL: 2009+ model Dodge trucks have stake pockets that are hidden or obstructed by the plastic rail caps, and require a trim of the plastic for the anchor points to be properly installed. We highly recommend using our custom router bits #5566 and #5567 – they make the installation quick and easy, and create for a perfect cut every time. Front Stake Pockets – The scribe lines in the front of the rail caps are incorrect, and are actually larger than the stake pocket hidden underneath. For this installation we’ve developed a custom router bit that enables you to quickly and easily trim out the top plastic rail to perfectly match the steel pocket underneath. The design of our router bit incorporates 4 roller bearings that run along the steel pocket as a guide. It only cuts the plastic, without scratching or cutting the painted metal surface of the rail. Using this router bit gives you a perfect cut every time, and allows you to then place our Retractable Anchor into the now exposed stake pocket. Rear Stake Pockets – The rear stake pockets appear to be open, but in fact have plastic lip that covers over the metal bed. For our retractable anchors to be properly installed, that plastic lip must be removed so that our stainless steel plate makes contact with the metal bed. The easiest way to remove this plastic edge is to use our saw blade bit to cut the plastic lip just below the metal, then use our router bit to clean up the plastic on top. Alternatively you can use a razor blade to cut the plastic rail. The scribe lines on the rear of rail caps are correct. So carefully use that blade to cut out the plastic square along those scribe lines. Then remove the plastic piece, and install our retractable anchor. Dimensions: 2.62 × 2.00 × 2.50 in Package Includes: Two (2) BullRing Tie Down Anchors Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 business hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase. Payment We accept payment by any of the following methods: PayPal Visa MC AMEX DISCOVER Shipping We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent USPS 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 60 days from the date you purchased it.
Price: 29.99 USD
Location: Temecula, California
End Time: 2024-08-17T20:16:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Non-Domestic Product: No
Custom Bundle: No
Fitment Type: Performance/Custom
Number of Rear Wheels: 2
Color: Black
Items Included: Mounting Hardware
Manufacturer Part Number: 4003
UPC: 669372400315
Mounting Hardware Included: Yes
Material: Stainless Steel
Maximum Weight Capacity: 1000 lb
Modified Item: No
California Prop 65 Warning: WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Brand: Bull Ring
Type: stake pocket tie down anchor
Manufacturer Warranty: Lifetime
Attachment Type: Fasteners
Bed Length: All
Features: Retractable, Snaps Up- Stores Flush
Finish: Polished
