Description: Material Standard Resin ABS-Like Plant-Base Surface Hardness (Shore D) 80-85 70-80 80-85 body contraction (%) 7-9 6-8 7-9 Tensile Strength (MPa) 20-40 20-35 20-35 Elongation (%) 5-15 15-25 5-12 Bending Strength (Mpa) 25-45 20-40 20-40 Flexural Modulus (Mpa) 650-900 600-800 600-800 Lower exposure time (s) paint screening machine 20-80; paint screening machine 20-80; paint screening machine 20-80; Black and white machine 10-60 Black and white machine 10-60 Black and white machine 10-60 Lowest layer 3-5 3-5 3-5 Normal layer exposure time (s) paint screening machine 4-15; paint screening machine 4-15; paint screening machine 5-15; Black and white machine 1.5-4 Black and white machine 1.5-4 Black and white machine 2-4 Stroke distance (mm) 6-10 6-10 6-10 Lifting speed (mm/min) 60-90 60-90 60-90 Lifting speed (mm/min) 120-180 120-180 120-180 colour Black/white/grey/skin color/transparent red/transparent blue/transparent green Black/white/grey/skin color Black/grey/skin color/transparent/transparent green features 1. Standard photosensitive resin, suitable for beginners and model hand printing,2. Easy to form, good precision, low odor, high cost performance 1. Good shaping, low odor and low shrinkage;2. It has good performance in all aspects of tensile strength, bending and toughness, and is not easily brittle.3. Molding performance is similar to ABS, used for light industrial purposes such as structural model making 1. Good shaping, low odor and low shrinkage;2. Good tensile, flexural and toughness properties.3. Contains eco-friendly plant-based ingredients Precautions: 1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;2. Do not take it orally, keep it away from children, wear gloves before use, avoid direct contact with the skin, and keep the room ventilated; do not enter the eyes, in case of accidental contact, rinse with plenty of water as soon as possible.3. The printed resin model needs to be cleaned with high-concentration alcohol (recommended above 95% concentration, the higher the better) for about 30s; after cleaning, wait for the alcohol to dry and then perform secondary curing, so that the best performance can be obtained;4. Do not pour the used resin in the trough back into the unused resin, and do not leave the resin in the trough for a long time without use. The contamination of the resin affects the printing effect;5. Store in the dark at room temperature. The ultraviolet rays in the sun will cure the photosensitive resin; it is recommended to store it at an ambient temperature of 15-35 °C. The lower the temperature in winter, the higher the resin viscosity;6. Sealed storage to avoid dust or moisture, which will affect the print quality Payment We accept PayPal only!!! Delivery details 1.Goods will be delivered within 5 working days after the payment received 2.We ship the items according to your Paypal address except the special notes from buyers ! 3.Be sure that your Paypal address is correct when you buy the items in ebay. 4.We do not take responsibility for item loss due to wrong address. 5.We are not responsible for any customs duty incurred at foreign customs.If you want to ship in other way, please contact us. Returns 1. Buyers must contact us within 30 days upon receiving the item(s), buyers should be responsible for the shipping cost for sending item(s) back and the shipping cost for re-sending the new item(s). 2. Please keep our products in original condition (packaging) if you return the item(s). If your item arrives faulty, we will exchange it for a replacement. 3. If you prefer a refund, we will fully refund to you through Paypal when we get the item. Contact The best way to contact us is by eBay messages.We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.We commit you 100% satisfaction guarantee. Feedback 1. We will appreciate a positive feedback with all 5 star rating when you are satisfied. 2. Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us. 3. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. 4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.On Oct 10, 2023 at 00:53:01 PDT, seller added the following information:
Price: 19.9 USD
Location: Los Angeles, California
End Time: 2023-10-24T07:35:58.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Manufacturer Warranty: 1 Year
MPN: Does not apply
Compatible Model: for most LCD/DLP/SLA 3D Printer
Filament Diameter: no
Item Width: 7cm
Unit Type: Unit
Item Length: 21cm
Item Height: 21cm
Country/Region of Manufacture: China
Material: LCD Resin
Unit Quantity: 1
Brand: SUNLU
Type: Standard resin
Available Variations
Color: Black
Price: 25.49 USD
Available Quantity: 200
Quantity Sold: 1
Color: White
Price: 25.49 USD
Available Quantity: 301
Quantity Sold: 3
Color: Transparent
Price: 25.49 USD
Available Quantity: 101
Quantity Sold: 2
Color: Transparent Red
Price: 24.09 USD
Available Quantity: 99
Quantity Sold: 0
Color: Transparent Blue
Price: 19.9 USD
Available Quantity: 100
Quantity Sold: 1
Color: Transparent Green
Price: 19.9 USD
Available Quantity: 100
Quantity Sold: 1
Color: Dark Gray
Price: 24.25 USD
Available Quantity: 218
Quantity Sold: 19
Color: Beige
Price: 19.9 USD
Available Quantity: 99
Quantity Sold: 4
Color: Green
Price: 19.9 USD
Available Quantity: 99
Quantity Sold: 1
Color: Orange
Price: 19.9 USD
Available Quantity: 99
Quantity Sold: 0
Color: Light Gray
Price: 24.25 USD
Available Quantity: 99
Quantity Sold: 2
Color: Lemon Yellow
Price: 25.49 USD
Available Quantity: 49
Quantity Sold: 0
Color: Taro Purple
Price: 25.49 USD
Available Quantity: 49
Quantity Sold: 0
Color: Sky Blue
Price: 25.49 USD
Available Quantity: 49
Quantity Sold: 0
Color: Mint Green
Price: 25.49 USD
Available Quantity: 49
Quantity Sold: 0