C6 Sonnax K36528R Billet R Ratio Super Servo Update Piston Kit Fits Ford Mercury

Description: C6 Transmission High Performance Servo"R" Ratio Servo Piston KitPart No. K36528RMid '68-later Since its introduction in 1969 with the 428 SCJ, the R code servo has remained the trick piece for C6 builders needing additional band apply force. Sonnax "R" ratio servo kit K36528R for C6 (mid 68-later) units features a no-leak pin which uses one O-ring and one PTFE ring to eliminate back pressure and leakage due to worn case bores. A replacement seal kit K36528R-SK also is available.Largest apply areaNo-leak servo pin design allows the servo piston to be used in worn boresTwo selective return springs allow for tuning of shift qualityNote:Some servo modifications involve blocking feed or exhaust passages in the case. These modifications must be removed. For proper operation of this servo, ensure that the exhaust passage and both oil feed passages are unrestricted.ContentsCoverAssemblyPin O-RingPin PTFE Seal RingMedium O-RingLarge O-rings (2)Cover GasketSelective Return Springs (2) A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other itemsC6 Transmission High Performance Servo "R" Ratio Servo Piston Kit Part No. K36528R Mid '68-later Since its introduction in 1969 with the 428 SCJ, the R code servo has remained the trick piece for C6 builders needing additional band apply force. Sonnax "R" ratio servo kit K36528R for C6 (mid 68-later) units features a no-leak pin which uses one O-ring and one PTFE ring to eliminate back pressure and leakage due to worn case bores. A replacement seal kit K36528R-SK also is available. ---Largest apply area ---No-leak servo pin design allows the servo piston to be used in worn bores ---Two selective return springs allow for tuning of shift quality Note:Some servo modifications involve blocking feed or exhaust passages in the case. These modifications must be removed. For proper operation of this servo, ensure that the exhaust passage and both oil feed passages are unrestricted. Contents ---Cover ---Assembly ---Pin O-Ring ---Pin PTFE Seal Ring ---Medium O-Ring ---Large O-rings (2) ---Cover Gasket ---Selective Return Springs (2) C6 Transmission High Performance Servo"R" Ratio Servo Piston KitPart No. K36528RMid '68-later Since its introduction in 1969 with the 428 SCJ, the R code servo has remained the trick piece for C6 builders needing additional band apply force. Sonnax "R" ratio servo kit K36528R for C6 (mid 68-later) units features a no-leak pin which uses one O-ring and one PTFE ring to eliminate back pressure and leakage due to worn case bores. A replacement seal kit K36528R-SK also is available.Largest apply areaNo-leak servo pin design allows the servo piston to be used in worn boresTwo selective return springs allow for tuning of shift qualityNote:Some servo modifications involve blocking feed or exhaust passages in the case. These modifications must be removed. For proper operation of this servo, ensure that the exhaust passage and both oil feed passages are unrestricted.ContentsCoverAssemblyPin O-RingPin PTFE Seal RingMedium O-RingLarge O-rings (2)Cover GasketSelective Return Springs (2) A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items C6 Transmission High Performance Servo"R" Ratio Servo Piston KitPart No. K36528RMid '68-later Since its introduction in 1969 with the 428 SCJ, the R code servo has remained the trick piece for C6 builders needing additional band apply force. Sonnax "R" ratio servo kit K36528R for C6 (mid 68-later) units features a no-leak pin which uses one O-ring and one PTFE ring to eliminate back pressure and leakage due to worn case bores. A replacement seal kit K36528R-SK also is available.Largest apply areaNo-leak servo pin design allows the servo piston to be used in worn boresTwo selective return springs allow for tuning of shift qualityNote:Some servo modifications involve blocking feed or exhaust passages in the case. These modifications must be removed. For proper operation of this servo, ensure that the exhaust passage and both oil feed passages are unrestricted.ContentsCoverAssemblyPin O-RingPin PTFE Seal RingMedium O-RingLarge O-rings (2)Cover GasketSelective Return Springs (2)

Price: 139 USD

Location: Shepherdsville, Kentucky

End Time: 2024-11-21T21:39:10.000Z

Shipping Cost: N/A USD