Char Lynn Eaton power steering torque generator rebuild kit S101-A--F+ 207-1001

Description: One, new, 21 piece rebuild kit for Char Lynn power steering hand pump (torque generator) models S-101 with suffix A, B, C, D or F and all S-207-1001 models. This is a combined kit so you can rebuild either unit and have the correct o-rings and bolts. There are two sizes (thickness) of the cap if you are putting this on a S-101. The A-D series is the thin cap known as the #10 cap. The F series and the 207's use the thicker cap. Both series use different center bodies. When Eaton acquired Char Lynn, they changed a few specs on their thin #10 replacement cap. Now you have both kits in one to ensure you can rebuild your unit no matter which end cap and body you have. This 21 piece kit comes complete with ALL NEW O-rings and 12 point mounting bolts so you can retorque your unit with confidence. Bolt torque on the Char Lynn is critical to ensure proper fit and seal. All parts match Char Lynn Specs in exact detail. This kit will NOT FIT any model in the 102 series or model 207-1002 series because both of those series use longer bolts to hold the unit together. I CAN CREATE a 102 or 207-1002 kit if you need one. It would be the same price, just different bolts. Contact me for details. Check your parts manual if you have questions or concerns. Made in the USA.FREE domestic shipping. The red torque generator in the photos is for reference purposes only. It does NOT come with the kit. As you may already know, this rebuild kit and all of it's associated internal parts are no longer available from Char Lynn as they were discontinued many years ago. Free domestic shipping to US 48 states. Contact me if you have questions about these torque generators as I have several parts here and I rebuild these units.

Price: 79 USD

Location: Cicero, Indiana

End Time: 2024-08-04T16:34:55.000Z

Shipping Cost: 0 USD