EPA Catalytic Converter Fits Subaru Forester Impreza Legacy Outback 2.5L 2006-12

Description: Description: The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment. If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases. However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it. All in all, the high quality catalytic converter with high quality materials and precision tools. Whats more, the product is covered with 5-year limited warranty. NOTE: BeFore placing the order, please check year and model according your vehicle. So you will get a catalytic converter perfect fitting For your car. And professional installation is suggested. Feature: Manufactured From High Quality & Durable Stainless Steel Catalytic Case For Long Lasting Durability & For Better Protection. This product is mainly used to convert toxic gases and pollutant into harmless gases and purify and treat automobile exhaust. Good emission control, high work efficiency and easy to use. Made according to the original specifications, it can directly replace old or broken parts. • EPA Approved. EPA approved For all Federal and CaliFornia compliant vehicles, including Low Emission Vehicles* in all states excluding CaliFornia. Not legal For sale in CaliFornia. If your vehicle is registered in CaliFornia, do not purchase this part. If your vehicle meets CaliFornia requirements, but is not registered in CaliFornia, this converter will work on your vehicle. • No engine light problems,Can pass EPA inspection • 5 years or 50,000 miles limited warranty Package Content; AS THE PICTURE Compatible with the following vehicles: Subaru2006-2010 Forester X Naturally Aspirated2006-2008 Forester X L.L. Bean Edition Naturally Aspirated2008 Forester (submodel: 2.5 X, 2.5 XS, 2.5 XS Premium, Anniversary Edition, Sports 2.5 X) Naturally Aspirated2009-2010 Forester (submodel: X Limited, X Premium, X Touring) Naturally Aspirated2010 Impreza 2.5i Limited Naturally Aspirated2010-2011 Impreza 2.5i Premium Naturally Aspirated2008-2009 Impreza Sport Naturally Aspirated2006-2011 Impreza (submodel: 2.5i, Outback Sport) Naturally Aspirated2006-2009 Legacy 2.5i Naturally Aspirated2009 Legacy 2.5i Touring Naturally Aspirated2007-2009 Legacy (submodel: 2.5i Limited, 2.5i Special Edition) Naturally Aspirated2008 Legacy (submodel: Limited, Touring) Naturally Aspirated2007 Outback 2.5i Basic Naturally Aspirated, Including Sport Model2010-2011 Outback 2.5i Premium Naturally Aspirated, Including Sport Model2009 Outback 2.5i Special Edition Naturally Aspirated, Including Sport Model2010 Outback 2.5i Sport Naturally Aspirated, Including Sport Model2006-2011 Outback (submodel: 2.5i, 2.5i Limited) Naturally Aspirated, Including Sport Model2008 Outback (submodel: 2.5i L.L. Bean Edition, 2.5i Limited L.L. Bean Edition, Base, Limited, Premier, Touring) Naturally Aspirated, Including Sport Model Install: Always defer to any included instructions. The instructions provided in this article are written for general cases of catalytic converter installation. Because the exact part needed and the installation process can vary from vehicle to vehicle, the steps you’ll need to replace your vehicle’s converter may be different than the ones here. When in doubt, always follow the instructions provided with your replacement part or consult the advice of a knowledgeable mechanic. Converters have a specific direction they should flow and have an arrow for direction of exhaust flow.Insert any gaskets supplied with the new catalytic converter. Some converters, especially bolt-installed ones, will come with small, round gaskets that sit in the pipes connected to the converter to give the converter a snugger, more secure fit. If your replacement converter came with these gaskets, install them according to any provided instructions before proceeding.Put the new catalytic converter in place. Next, hold the catalytic converter in the position where it will eventually be installed. Double check to make sure it is pointed in the right direction (there should be an arrow indicating this) and that the correct side is facing down.Since its tricky to work on the converter with one hand while you hold it in place with another, for the next few steps, it can be useful to enlist a willing friend to hold the converter in place while you work or use a stand to hold it up in place. Finger-tighten nuts on the bolts. If your vehicles catalytic converter was bolted in and your replacement converter has bolt holes that match your exhaust systems, installation is usually a cinch. To start, re-insert your bolts and use your hands to manually tighten them. This makes it easier to get all of the bolts to align correctly because the looseness gives you a small degree of "wiggle room" to make minor adjustments as needed. Tighten down all the bolts. Starting on the "front" end of the converter (the end further away from the vehicles exhaust), tighten the bolts with a suitably-sized wrench. Proceed to the back end when you finish tightening the bolts on the front.Youll want your bolts to be very tight. Most exhaust leaks are caused by loose bolts, so making sure your bolts are extra tight now can save you headaches in the future. Alternatively, weld the converter into place. If you need to weld your converter into place, the process is somewhat more involved. Youll need a professional-grade welding machine (such as a MIG welder) and the proper training and expertise required to use one safely (or a friend who has these things). Dont attempt to weld your converter back into place if youre not a competent welder — you could damage your vehicle or even hurt yourself.Weld your converter into place by carefully joining it to the exhaust system pipes at either end. Be sure to create a secure, air-tight seal at each weld. If the pipes arent wide enough, you may need to heat them up and flare them to make them fit. If your pipes dont quite reach one end of your converter, you may need to weld an additional extender pipe in. Sometimes you have to do a partial weld then lower the exhaust to finish the top part of the weld.Be sure to allow your welds to cool to a safe temperature before proceeding. Screw the oxygen sensor back into place. If you originally removed one or more oxygen sensors to access your converter, replace them now. As you do, check to make sure that the attached wiring is secure and is not frayed or damaged — this can lead to inaccurate readings and even false "check engine" lights. Double-check your work. At this point, if youve done everything correctly, youre basically done. Take the opportunity to make sure one last time that the catalytic converter is connected correctly and there are no gaps or leaks at either of the connections or the oxygen sensor. If you bolted your converter in, make sure all of your bolts tight. If you welded it in, make sure your welds are sturdy and airtight. Payment WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. PayPal preferred. Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days. We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay. The tracking number will be given for the customer to check the shipping status online (registered or faster service only). We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. Returns 1.All of our brand new items come with a 60-Days money-back guarantee. 2.We define the item as defective only if it doesnt function as described, It is the buyers responsibility to understand the item description before bidding. 3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. 4.We will refund the purchase price if the replac ement is not available or buyer prefers a refund and send the original item back at his/her own cost. 5.Shipping& handling cost are not refundable. 6.Man-made damage by abuse or wrong operation is not covered by this warranty. 7.No product liability insurance is assumed. 8.Refunds will be credited within 5 to 7 business days of receiving the return. When weve received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. Customer Services Q: How do I pay for my purchase? A: MY store accepts PayPal. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. All rights reserved.

Price: 191.32 USD

Location: Pomona, California

End Time: 2024-10-30T13:45:41.000Z

Shipping Cost: 0 USD