Description: Made in the USA To the highest quality, don't be fooled by the competition that makes everything in China! the Chinese have copied my products with the worst quality! ... take a moment and look carefully at the quality (the photos speak for themselves) see the comments of my 100% satisfied clients... More than 10 years in the manufacture of these exhausts from Florida USA. You must know this before you make your purchase!-There is no painting in this exhaust, Rust can come out over time, "solution" you applies high heat paint.-This exhaust is Loud than the factory.-This exhaust will change color due to the high heat generated by the engine. Please! look at all the pictures to know if it will work on your application, compare all the measurements using a measuring tape to make sure it does not hit the fender or frame. MADE IN USA! TOP NOTCH! WORKS ON: Predator 212cc, tillotson 212, BILT HARD 7HP 212cc, GX160 GX200, duromax 7hp. Please look at all the pictures to know if it will work on your application, compare all the measurements using a measuring tape to make sure it does not hit the fender or frame. Type of material: mild steel, Uncoated Steel. Exhaust has a female thread on the tip that is 3/4 That does not mean that current measurement, threads are measured by TPI. What is included in the order? -Gasket. -2 Lock washer -Exhaust pipe -2 nut. -muffler lock nut -The exhaust pipe has a 3/4 female thread for you to screw on the muffler ( muffler not include ) This been tested on Predator 212cc (6.5hp) Predator Hemi, Engine From Harbor Freight, Honda GX160, GX200, Tillotson Hemi 212 Engine, XtremepowerUS Electric Start 7 HP, BILT HARD 7HP 212cc Horizontal Shaft Gas Engine, AlphaWorks Gas Engine 7HP 212cc, also tested on Powerhorse 208cc, DuroMax XP7HPE (no tested on other engine) Florida residents pay 7% taxes. -------------Finding the Correct Pipe Thread Size National Pipe Threads (NPT) Pipe sizes do refer to physical dimensions, but the plumbing industry standard for the sizes of pipe is not always as straight-forward as measuring the pipe. Measuring the pipe will oftentimes mislead you into choosing the wrong pipe, so do take care. The "pipe thread size" as shown in column 3 of the table below is measured and based on the inside of the pipe. But, to actually determine the size of a pipe, the outside diameter of each pipe or fitting must be measured and compared to the table for size identification. For example, a 3/4" NPT pipe thread has an outside diameter of 1.050 inches. Each thread size has a defined number of threads per inch (TPI). The 3/4" NPT pipe thread has 14 threads per inch. Both the TPI (threads per inch) and OD (outside diameter) of the thread are required for positive identification of thread size because several sizes have the same TPI. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Please check my other Header (on other audition)
Price: 29.99 USD
Location: Dunnellon, Florida
End Time: 2024-09-23T19:59:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: Predator 212cc, Powerhorse 208cc, DuroMax 7Hp, til
Modified Item: No
Country/Region of Manufacture: United States
MPN: Does Not Apply
Custom Bundle: No
Brand: andrei-x
Product Type: Header exhaust pipe, predator 212, BILT HARD 7HP 2
Non-Domestic Product: No
Type: predator 212, tillotson 212, BILT HARD 7HP 212cc
