Description: Brand New FIRENOCK Hunting & Target crossbow lighted nock J6ht-R for Mission (Pro package)(J=J style nock, 6=6 pack, h=hunting, t=target, R=Red LED)Fit Mission MXB Crossbows by MatthewFit Barnett Vengeance Firenock “J” style nock will fit most bolts with ID (Internal Diameter) of 0.299” - 0.301” and fit on 0.165”, 0.155" and 0.145" OD (Outside Diameter). See Firenock lighted nock on youtube (just input " firenock nock") Features:USA made G switch technology, LED activates when it is shot No actuator magnet, actuator adaptor or sticker is neededField replaceable nockField replaceable batteryUltra bright focus-beam LED (11,000 LUX)24K Gold plated connector for best reliability and corrosion resistanceBlood proof / water proof designCan shoot into hard objects / over 290 fps and stay litWeighs ~33 grains with the nock Contents:3 pcs "H"ez Hunting circuits in red3 pcs "T" Target circuits in red9 pcs "J" style nocks in red9 pcs "J" style nocks in clear6 pcs Extreme Shock End Caps with O-rings2 pcs End Cap Installation Tools6 pcs Batteries with O-rings1 AG0GEL for gluing End Caps1 PJx Extreme Shock Matched Weight Pack Crossbow Bolt Fit List:Barnett: same as EastonBowtech: Striker BoltBeman ICS: ICS Thunderbolt®Carbon Impact: Ultra Bolt XLT 22Carbon Force: Tac 10, Tac 15 Radial Crossweave ArrowsEaston: Carbon ReelTree™ Power Bolts, Carbon Power boltExcalibur: same as EastonGold Tip: Laser II, Laser II Pro, Laser IIIHarvest Time: HT-XHorton: same as EastonTenPoint: Pro EliteVictory: Crossbow bolt Serving Size List:Serving size of 0.165" is usually used on PSE Tac bowsServing size of 0.145" is usually used on Scorpyd/Parker bows Notes: Darton, Mission, Barnette must use J nock due to there is no room in trigger box to accept normal long nock prongsDouble check your serving size with caliper before purchase to ensure Firenock J will fit perfectly on your bow stringGel type super glue (e.g. Firenock AG0GEL) is needed to successfully install Extreme Shock Battery End CapClean arrow shaft with acetone before installation of End CapPut glue into the cleaned arrow shaft (do not put glue on End Cap / Tool)Push End Cap with tool straight (do not rotate) into the arrow shaft during installation of End Cap
Price: 149 USD
Location: Illinois
End Time: 2023-12-18T00:29:52.000Z
Shipping Cost: 9 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: J6ht-R
MPN: Does Not Apply
Brand: Firenock
