Description: Choose from Futaba 4PM, 4PMPLUS R304SB, 3PRKA R203GF, 7PXR R334SBS-E, 10PX R404S-E System. ***Rechargeable battery available for 3PV, 4PM, 4PM Plus, 7PXR, 10PXR here https://www.ebay.com/itm/304849797023 Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System w/R304SB Receiver FUT01004388-3Features: T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.T-FHSS MINIZ SYSTEM: By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 must be purchased separately.TELEMETRY SYSTEM: The T4PM transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.2.4 GHZ SS RADIO COMMUNICATION SYSTEM: Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.MODEL MEMORY FOR 40 MODELS: Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.4 AXIS JOG BUTTON: The (JOG) button can be operated in 4 directions: up, down, left, and right.ESC-LINK FUNCTION (MC-LINK): This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC950CR, MC850C, MC851C, MC602C, MC402CR, etc.S.BUS SERVO: This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.STEERING MIXING: Smooth cornering is possible by independent left and right steering servo setting.BRAKE MIXING FOR LARGE CARS (BRAKE): Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.GYRO MIXING (GYRO MIX): The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS): This function can be used with crawlers and other 4WS type vehicles.DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC): ESCs at the front and rear are controlled independently.CPS-1 MIXING (CPS MIX): LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.ANTI-SKID BRAKING SYSTEM (TH A.B.S): This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.THROTTLE ACCELERATION (ACCEL): Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.THROTTLE SPEED (SPEED): Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.STEERING SPEED (SPEED): When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.RACING TIMER (TIMER): The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL): This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.TRIGGER POSITION CAN BE CHANGED: The position of the throttle trigger can be moved forward and backward.TENSION ADJUSTMENT FUNCTION: The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.MECHANICAL ATL ADJUSTMENT: Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.Specifications: Transmitter:Protocol: T-FHSS SR/T-FHSS/S-FHSSCommunication Method: One-way operating systemMaximum Operating Range: 100m (Except when using MINI Z system) (Optimum condition)Safety: F/S, B-F/S, IDFrequency: 2.4GHz bandRF Power Output: 100mW EIRPPower Requirement: x3 Dry Cell Battery Penlight (4.5 V)Current Drain: 150 mA or lessAntenna: 1/2? di-poleReceiver:Type: R304SBProtocol: T-FHSSSize: 35.1x23.2x8.5mmWeight: 6.6 gOperating Voltage: DC 4.8V-7.4VIncludes: T4PM TransmitterR304SB OR R334SBS ReceiverDry Battery Holder (wish to have a rechargeable battery see https://www.ebay.com/itm/295246014232) Mini Screwdriver 4PM Plus 4Chan with R304SB-E Features:T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry functions. *R304SB and R304SB-E are not compatible with SR system.T-FHSS MINIZ SYSTEM: By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 01004397-3 comes with no receiver.FHSS MINIZ SYSTEM: By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to the non-Evo Mini-z.TELEMETRY SYSTEM: The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.2.4GHz SS RADIO COMMUNICATION SYSTEM: Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes interference from other 2.4 GHz systems.MODEL MEMORY FOR 40 MODELS: Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created using the model copy function.4 AXIS JOG BUTTON: The (JOG) button can be operated in 4 directions: up, down, left, and right.ESC-LINK FUNCTION (MC-LINK): This dedicated function allows you to set up the Link software so that your T4PM can control the variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.S.BUS SERVO: This is a special function that allows the setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.STEERING MIXING: Smooth cornering is possible by the independent left and right steering servo settings.BRAKE MIXING FOR LARGE CARS (BRAKE): Brake mixing of the front and rear wheels of 1/5 gas power cars and other large cars can be adjusted independently.GYRO MIXING (GYRO MIX): The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS): This function can be used with crawlers and other 4WS-type vehicles.DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC): ESCs at the front and rear are controlled independently.CPS-1 MIXING (CPS MIX): LED lighting and flashing control using our CPS-1 channel power switch can only be matched to steering and throttle operation by a switch.ANTI-SKID BRAKING SYSTEM (TH A.B.S): This function applies the brakes so that the tires of gas-powered cars do not lose their grip on the road even when braking at corners.THROTTLE ACCELERATION (ACCEL): Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.THROTTLE SPEED (SPEED): Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, the operation can be performed smoothly and easily. It also suppresses battery consumption.STEERING SPEED (SPEED): When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.RACING TIMER (TIMER): The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling times are indicated by an audible alarm. An up timer is also provided.FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL): This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.TRIGGER POSITION CAN BE CHANGED: The position of the throttle trigger can be moved forward and backward.TENSION ADJUSTMENT FUNCTION: The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.MECHANICAL ATL ADJUSTMENT: Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.Specifications:Transmitter:Voltage: 4.5-6.6VCommunication Method: Bidirectional protocolMaximum Range: 100m (Except the MINIT system) (Optimum condition)Frequency: 2.4GHzRF Power Output: 100mW EIRPCurrent Drain: 150 mA or lessTransmission Antenna: 1/2(Lambda) di-poleReceiver:Dimensions: 35.1x23.2x12.5mmVoltage: 4.0-8.4VWeight: 7gIncludes:(1) Futaba 4PM+ Transmitter(1) Dry Battery Holder(1) R304SB-E Receiver(1) Mini ScrewdriverNeeded to Complete:(3) AA Batteries or (1) 6.6V LiFe Battery Futaba 3PRKA 2.4GHz FHSS Radio System w/R203GF Receiver FUT01004363-3 This is the Futaba 3PRKA 2.4GHz FHSS Radio System. Futaba designed the 3PRKA 2.4GHz radio for drivers looking for an economically priced system that has impressive performance and high quality. The 3PRKA is great for new drivers just starting out and for drivers who want to upgrade the radio in their ready-to-run model. It offers a ton of features at a remarkably low price.Features:Throttle and Steering Trim and ReverseThrottle End Point AdjustmentSteering Dual RateSwitched third channelThrottle Fail Safe70:30 Throttle ModeBuilt-in antennaLow battery warningR203GF 3-Channel 2.4GHz FHSS Receiver Features:High voltage (4.8V - 7.4V)Dimensions: 39x26x10mm (1.54x1.02x0.39")Weight: 0.28 oz (8 g) 7PXR 7-Channel 2.4GHz T-FHSS Telemetry Radio System w/R334SBS-E Receiver 01004396-3 7PXR Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004395-3) (01004396-3) FEATURES FULL COLOR TOUCH SCREEN LCD: Transmitter has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE: Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS: Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION: It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH: A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS: Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING: Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE: This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS: ESCs at the front and rear are controlled independently. GYRO MIXING: The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING: This function is intended for vehicles such as tanks. CPS-1 MIXING: LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO: This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK: This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED: Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED : When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED: When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION: This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION: This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED: The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT: The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS: Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT: The left and right installation direction of the wheel section can be reversed. VIBRATION BUILT INTO THE GRIP: The vibration can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System w/R404SBS-E Receiver The Futaba 10PX 10-Channel 2.4GHz T-FHSS Radio System is a digital proportional RC system that features a super response rate. This transmitter features the F-4G telemetry with a faster response than the T-FHSS SR system. Made for the serious racer, this radio allows for many fine tuned adjustments including gyro mixing, throttle speed, steering speed, dual rate and more! These features and functions give you the needed adjustments for refined performance. This combo includes the Futaba R404SBS-E receiver for out of the box performance. The large 4.3" is produced in full color and features a backlit LCD touch screen. The screen is transflective, allowing for excellent indoor and outdoor visibility. For extreme comfortability, the steering wheel may be angled and adjusted. This gives the user the ability to fine tune the fitment of the radio to best suite their driving style. For adaptability, the steering wheel may also be moved to a left-handed position. The switch layout offers precise control over the assigned channel/function. NOTE: When the 10PX is powered on, bright dots may appear on the display. The display contains an extremely large number of Thin-Film-Transistors (TFT) and is manufactured using high-precision technology. Any bright dots that may appear on the display are intrinsic of the TFT manufacturing.Features: Full color touch screen LCDF-4G system & telemetryUp to 10 channels can be operated by using the S.BUS2 systemBy setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately)Software can be updated via microSD card (Sold Separately)40 model memory with allowance for 15 character namesAllows for the use of an optional LiPo Brake mixing for large carsSteering mixing is independent allowing for precise left and right steering servo settings4WS mixing for crawlersDual ESCs mixing allows for two ESCs to be controlled independentlyThe sensitivity of Futaba car gyros can be adjusted from the T10PXTank mixingCPS LED light mixingFutaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servoSpecifications:Transmitter:Frequencies: 2.4GHz band @ 100mWProtocols: T-FHSS-SR/T-FHSS/S-FHSS/F-4GVoltage:LiPo: 7.4 VLiFe: 6.6 VCurrent Drain: 350 mA or less (When the T-FHSS, Vibration off, back lighting on)Antenna: 1/2 dipoleR404SBS-E Receiver:Size: 1.00×0.81×0.42in (25.5×20.7×10.6mm)Weight: 7.2g (0.25oz)Voltage: 3.7-7.4V DCIncludes:(1) T10PX Transmitter(1) R404SBS-E Receiver(1) Dry Battery Holder(2) Wheel offset adapters(1) 32° Wheel adapter(1) 5° Wheel Angle spacer(1) Large diameter steering wheel(2) Trigger guards(1) Rubber Grip(1) Hex wrench(1) Short manual
Price: 16.95 USD
Location: Victor, New York
End Time: 2024-11-23T21:47:56.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Futaba
UPC: 4513886031953
MPN: FUT01004388-3
Manufacturer SKU:: FUT01004388-3
Available Variations
Color: 3PRKA Radio System w/R203GF RX
Price: 94.99 USD
Available Quantity: 2
Quantity Sold: 2
Color: 4PM Radio System w/R304SB
Price: 269.99 USD
Available Quantity: 1
Quantity Sold: 0
Color: 10PX 10Ch Radio System w/R404SBS-E
Price: 749.99 USD
Available Quantity: 1
Quantity Sold: 0
Color: 4PM Plus Radio System w/R304SB-E
Price: 299.99 USD
Available Quantity: 2
Quantity Sold: 0
Color: 7PX Wheel UBT3335
Price: 17.95 USD
Available Quantity: 1
Quantity Sold: 1
Color: Rubber Grip Handle 4PX & 7PX Large UBT3330
Price: 16.95 USD
Available Quantity: 2
Quantity Sold: 0
Color: UBA0151 LT2F2000B LiPo Battery 10PX
Price: 93.99 USD
Available Quantity: 1
Quantity Sold: 1
