FUTABA T3PV R203GF With receiver Entry model

Description: Features and Specifications FUTABA T3PV R203GF With receiver Entry model ●T3PV●R203GF The T3PV is a radio control system with just the right amount of functionality for those who want to get started with radio-controlled cars, with a 3-channel control with the lightest body in its class that fits comfortably in the hand, and channels for adjusting steering, throttle, and accessory devices such as gyros. To step up, you can combine it with a 4-channel receiver (sold separately) to use the telemetry function, as well as the brake mixing function as a Special MIX (4ch) for cars equipped with independent brakes on the front and rear, and the 4WS mixing function, which is convenient when adding a rear steering servo to a 4WS car. ●2.4GHz telemetry system (T-FHSS mode only): By combining the receiver battery voltage and optional sensors, you can also monitor the voltage of the running battery.●Display screen with large fonts for easy viewing●Simple and easy-to-understand operation buttons●Power supply unit with dry battery box: Since it is battery-powered, you can immediately resume racing or adjustments even if the battery runs out by preparing spare dry batteries.The dry battery box can also be easily removed, so you can smoothly replace it with the optional rechargeable battery.●You can dress it up with the optional carbon handle. Functions and specificationsSetup related●ABS (anti-skid brake system): If you apply the brakes while cornering, understeer will occur, but by using this function, understeer is less likely to occur and you can clear corners smoothly.●EXP (exponential): You can adjust the response near neutral to be milder or quicker, so you can make it easier to drive by adjusting the steering and throttle response to your liking.● Digital trim: This function allows you to make fine adjustments so that the car runs straight when in neutral, or to stop the car. A beep sounds with each click. The value is also stored even when the power is turned off.● Steering gyro control function (using ch3): When using a Futaba gyro for drift cars or electric grip categories, you can adjust the gyro sensitivity using ch3. ● Sub trim: When assembling the car, use the sub trim to adjust the neutral position of each servo. ● Reverse: You can reverse the direction of operation for each channel. (All ch) ・The steering operates in reverse → Set CH1 to REV ・Forward and reverse operate in reverse → Set CH2 to REV ● D/R (Dual Rate): You can adjust the maximum steering angle of the steering (CH1) in the same proportions on the left and right. ● Fail safe (throttle): By setting the throttle signal to a state where it can be forced to stop in advance when the receiver is no longer able to receive normal signals from the transmitter, you can safely stop the motor or engine. ●Battery fail-safe (throttle): If the voltage of the receiver/servo battery drops, the throttle signal can be moved to the brake side, so it is especially recommended for use in gasoline engine cars. Battery fail-safe voltage can also be adjusted. (There are some functional restrictions on receivers other than the standard set (R314SB/SB-E) and the R334SBS series, so please refer to the instruction manual for details.) ●EPA (End Point Adjuster): Maximum steering angle adjustment (all channels)●T-FHSS / S-FHSS / FHSS switching: In addition to the standard set receiver (T-FHSS system), you can use receivers that support these systems. Model menu related●Model name (4 characters) ●10 model memory: Equipped with model memory for 10 vehicles. ●Model select / copy / reset Mixing related●Brake mixing: Can be used when using separate brake servos for the front and rear. ●4WS: A function that controls the front steering and rear steering with separate servos. ●SMX (Special MIX selection): 4WS mixing or brake mixing can be used. *This function can be used with receivers with 4 channels or more, so in addition to the standard receiver (R314SB/SB-E), it can also be used with the R334SBS series (T-FHSS compatible), R214GF-E (FHSS system), and R2008SB (S-FHSS system). It cannot be used with 3-channel/2-channel receivers (R203GF, etc.). Accessories●LED monitor●Charging jack: For charging when using the optional rechargeable battery.●Low battery alarm: An alarm sounds and the LED flashes when the transmitter's battery capacity decreases and the voltage drops. The alarm operating voltage can also be changed depending on the type of battery used.●Auto power off: If there is no operation for a certain period of time, the power will automatically be turned off. [Optional parts]● Nickel metal hydride battery HT5F1800B (6.0V / 1800mAh)Recommended charger HBC-3A (4): Charge from the charging jack of the T3PV.● Lithium ferrite battery FT2F1700B V2 (6.6V / 1700mAh), FT2F2100B V2 (6.6V / 2100mAh), FT2F1100B (6.6V / 1100mAh)Recommended charger LBC-4E5: Remove the battery from the transmitter and charge from the balance charging connector.● Voltage sensor SBS-01V● Carbon handleShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior. About Importer's Obligation Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Price: 182 USD

Location: Saitama

End Time: 2024-11-09T07:56:27.000Z

Shipping Cost: 0 USD