HackFab Carbon Fiber Oval Chassis conversion kit for Latrax Rally (5 cell nimh/2

Description: HackFab Carbon Fiber Oval Chassis conversion kit for Latrax Rally (5 cell nimh/2s lipo only) This is our new carbon fiber oval chassis conversion for the Latrax Rally car. This replaces the stock plastic tub chassis with a left-offset carbon plate for better oval handling. The kit re-uses the stock hardware from your Latrax Rally. It is a quick change to swap out the upper and lower chassis plates for the carbon upgrade. Fitment of the original receiver box cover to the top plate will not be possible with this, but you can still use double sided tape to secure your receiver to the plate. The included aluminum battery brackets are the same proven design that we utilize in our Losi Mini-T 2.0/Mini-B conversions. Also includes the same Pure-tech velcro strap. IMPORTANT: The width of these brackets DO NOT ALLOW fitment of the optional Traxxas 6 cell nimh battery. We will be releasing an updated version of the lower chassis and brackets that will allow for better fitment of the 6 cell. Therefore, we are advertising this initial run as recommended for 5 cell nimh and 2s lipo batteries only. The PowerHobby 2000mah 2s lipo and Gens Ace 2200mah 2s lipo that we run in the Losi conversions both fit. Other 2s lipos may as well. Includes:Carbon fiber lower chassisCarbon fiber upper front and rear chassis bracesAluminum battery bracketsVelcro strapMounting hardware for battery brackets Car not included and shown for demonstration purposes only. Also shown on vehicle (but not included) is the HackFab front and rear carbon shock towers for Latrax, HackFab 30x30mm Fan Mount for Latrax, and HackFab 30x30mm aluminum fan. HackFab Carbon Fiber Oval Chassis conversion kit for Latrax Rally (5 cell nimh/2s lipo only) This is our new carbon fiber oval chassis conversion for the Latrax Rally car. This replaces the stock plastic tub chassis with a left-offset carbon plate for better oval handling. The kit re-uses the stock hardware from your Latrax Rally. It is a quick change to swap out the upper and lower chassis plates for the carbon upgrade. Fitment of the original receiver box cover to the top plate will not be possible with this, but you can still use double sided tape to secure your receiver to the plate. The included aluminum battery brackets are the same proven design that we utilize in our Losi Mini-T 2.0/Mini-B conversions. Also includes the same Pure-tech velcro strap. IMPORTANT: The width of these brackets DO NOT ALLOW fitment of the optional Traxxas 6 cell nimh battery. We will be releasing an updated version of the lower chassis and brackets that will allow for better fitment of the 6 cell. Therefore, we are advertising this initial run as recommended for 5 cell nimh and 2s lipo batteries only. The PowerHobby 2000mah 2s lipo and Gens Ace 2200mah 2s lipo that we run in the Losi conversions both fit. Other 2s lipos may as well. Includes: Carbon fiber lower chassis Carbon fiber upper front and rear chassis braces Aluminum battery brackets Velcro strap Mounting hardware for battery brackets Car not included and shown for demonstration purposes only. Also shown on vehicle (but not included) is the HackFab front and rear carbon shock towers for Latrax, HackFab 30x30mm Fan Mount for Latrax, and HackFab 30x30mm aluminum fan. × × × × × × × × × × Buy now and save! Tell a friend Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like HPI LP32 WHEEL ATG RS8 CHROME (2) Robitronic R25012 - Shock Cap Set for Protos Tekno RC Aluminum Rear-Rear Adjustable Hinge Pin Brace (Gun Metal) +1.5 Tekno RC CNC Aluminum Rear-Rear Adjustable Hinge Pin Brace (Gun Metal) -1 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © HackFab Hobbies Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are not accepted Seller will pay for return shipping. eBay integration by

Price: 69.99 USD

Location: Sherburne, New York

End Time: 2024-12-02T16:44:31.000Z

Shipping Cost: N/A USD