Description: Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnect Capability, Ideal for Garages Heat detector alerts to temperatures rising above 135⁰ Fahrenheit & sounds an 85-decibel alarm to help protect your family Heat alarm operates on a 120V wired power source with a 9-Volt alkaline battery backup Quick-connect power harness makes installation fast and easy An 85-decibel alarm sounds & a red LED indicates the smoke detector is sensing smoke or fire Test-Hush Button makes testing the detector or silencing false alarms easy (false alarms may occur from routine cooking, shower steam, dust or humidity) Interconnection capability: allows you to connect up to 18 smoke, heat, or CO alarms, with the possibly it interconnect 6 strobe lights or relay modules UL Certified, 5- manufacturer satisfaction The Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnectable, model , is an AC/DC powered heat alarm that operates on your home's 120V power source. In the event of a power failure, the heat alarm comes equipped with a 9-Volt battery backup (included). Using heat sensing technology, the wired heat alarm detects temperatures rising above 135⁰ Fahrenheit, alerting homeowners to dangerous temperatures unlike a smoke alarm, which only detects smoke. Heat detectors are recommended for areas where a smoke alarm may not be appropriate, such as in a kitchen, garage, attic, or other area where smoke or dust may set off a false alarm on a smoke detector. Installing both smoke and heat detectors in a home can provide extra protection while triggering fewer nuisance alerts. The heat alarm includes a quick-connect power harness to make installation fast and easy. An 85-decibel alarm sounds when the high temp sensor detects elevated heat conditions. Two LEDs indicate the heat sensor alarm's status: a green LED is constantly 'on' when AC power is present, and a red LED will flash every 30-40 seconds to indicate that the heat alarm is operating properly; the red LED and will flash rapidly when the unit is sounding until air temperature is reduced. The heat detector can be used as a single unit or interconnected with up to 24 devices (18 of which can be initiating) in a multiple-station arrangement, not exceeding the NFPA (National Fire Protection Association) limit of 18 initiating devices (smoke, heat, CO). It is possible to interconnect 6 strobe lights and or relay modules. Ideal for garages. UL Certified with a 5- . .com Heat Alarm view larger 120VAC Wire In Heat Alarm with 9V Battery Back Up Rather than smoke, the responds to temperatures rising above 135˚F. This unit is interconnectable with other units of the same like. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (smoke, heat, CO, etc) interconnected. It is still possible to interconnect 6 strobe lights and or relay modules in addition to the 18 initiating devices. This unit is UL Listed. Consumer benefits The provides you and your family an early warning to dangerous temperatures greater than 135˚F. This unit also includes a tamper resist pin to deter tampering or theft. What's in the box One single 135F smoke alarm. A five- .SpecificationsInterconnectable – Interconnects with up to 24 devices of which 18 can be initiating Test Button – Tests unit’s electronic circuitry, horn and battery function 9V Battery Back Up – Provides continuous protection even during power outages Red LED – Flashes every 30-40 seconds to indicate proper operation Low Battery Indicator – Alerts user in the event of a low or missing battery Quick Connect Power Harness – Makes installation fast and easy From the Manufacturer The 120-Volt AC Hardwire Heat Alarm gives you and your family an early warning to dangerous temperatures of 135-Degree F or more. This unit can be used as a single station unit or it can be interconnected to up to 24 devices in a multiple station arrangement. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms and or 18 initiation alarms. The heat detector includes a tamper resist pin to help deter tampering or theft. See more
Price: 55.99 USD
Location: Katy, Texas
End Time: 2024-09-24T00:28:15.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Pattern: Detector
Battery Cell Type: Alkaline
Power Source: Hardwired
Included Components: User Manual
Global Trade Identification Number: 00025417841350
Upc: 025417841350
Batteries: 1 9v Batteries Required. (included)
Product Dimensions: 6 X 5 X 2 Inches
Edition: Gas_smoke_fire_alarm
Brand: Kidde
Item Package Quantity: 1
Type: Details In Description
Batteries Required?: Yes
Alarm: Audible
Voltage: 120 Volts (ac)
Style: Hardwired Heat Detector
Features: Battery Backup
Upper Temperature Rating: 135 Degrees Celsius
Item Weight: 10.2 Ounces
Batteries Included?: Yes