Hot Wire Foam Factory Crafters Guitar Neck Removal Kit

Description: Fast Shipping - Made in the USA - Quality Customer Service Hot Wire Foam Factory Crafters Guitar Neck Removal Kit Crafters Guitar Neck Removal Kit Remove guitar necks for resetting without harmful steam! Our Crafters Hot Knives work great for releasing the adhesives used on guitar necks! The blades can be used to heat up the adhesive without the potential damage to the finish caused by steam from a mini iron. This kit includes two 4-Inch Hot Knives and two Crafters Power Supplies. Includes: 2 Hot Knives 2 Single-Temperature Crafters Power Supplies (220 volt input available) Printed Instructions Need help figuring out which size drillbit to use for the holes? One of our customers told us: "I used a 1.3mm (0.051") drill and it was perfect for the 4-Inch Hot Knife blade. Personally, I wouldn't go any smaller because the crimped tip binds up easily, otherwise. If you don't have a 1.3mm drill I would recommend anything from 3/64" (0.0469") up to 1/16" (0.0625). With the 3/64" you might have to re-drill the hole to open it up slightly. Don't force the blade or you might wreck it." Be sure to test this on a scrap of wood before drilling into your guitar. Features a handy on/off switch right on the handle and comes with 10 feet of power cord. CAUTION: These tools are designed for cutting soft foam. DO NOT FORCE the blade downward. Gently push the blade downward into your predrilled hole. PAYMENTSHIPPINGWARRANTY/RETURNSPAYMENTSHIPPINGWARRANTY/RETURNSWe accept payment by any of the following methods: PayPal, Visa, Amex, Discover, MasterCard Buyers in California will be charged 8% sales tax. Please pay as soon as possible, as that will allow us to ship your item to you sooner! Packages are always insured. We ship within 2 business days (So if you order Monday, your order will ship by Wednesday). Weekends and holidays do not count as business days. We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay. USA - FedEx & USPS (United States Postal Service) Canada/Mexico - USPS (United States Postal Service) International Worldwide (Except Hong Kong or China) - USPS (United States Postal Service) International Limited Warranty & Limitation of Liability Information: This product is warranted for non-commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above. Return Policy: HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.. Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying. Crafters Guitar Neck Removal Kit Remove guitar necks for resetting without harmful steam! Our Crafters Hot Knives work great for releasing the adhesives used on guitar necks! The blades can be used to heat up the adhesive without the potential damage to the finish caused by steam from a mini iron. This kit includes two 4-Inch Hot Knives and two Crafters Power Supplies. Includes: ---2 Hot Knives ---2 Single-Temperature Crafters Power Supplies (220 volt input available) ---Printed Instructions Need help figuring out which size drillbit to use for the holes? One of our customers told us: "I used a 1.3mm (0.051") drill and it was perfect for the 4-Inch Hot Knife blade. Personally, I wouldn't go any smaller because the crimped tip binds up easily, otherwise. If you don't have a 1.3mm drill I would recommend anything from 3/64" (0.0469") up to 1/16" (0.0625). With the 3/64" you might have to re-drill the hole to open it up slightly. Don't force the blade or you might wreck it." Be sure to test this on a scrap of wood before drilling into your guitar. Features a handy on/off switch right on the handle and comes with 10 feet of power cord. CAUTION: These tools are designed for cutting soft foam. DO NOT FORCE the blade downward. Gently push the blade downward into your predrilled hole. Fast Shipping - Made in the USA - Quality Customer Service Hot Wire Foam Factory Crafters Guitar Neck Removal Kit Crafters Guitar Neck Removal Kit Remove guitar necks for resetting without harmful steam! Our Crafters Hot Knives work great for releasing the adhesives used on guitar necks! The blades can be used to heat up the adhesive without the potential damage to the finish caused by steam from a mini iron. This kit includes two 4-Inch Hot Knives and two Crafters Power Supplies. Includes: 2 Hot Knives 2 Single-Temperature Crafters Power Supplies (220 volt input available) Printed Instructions Need help figuring out which size drillbit to use for the holes? One of our customers told us: "I used a 1.3mm (0.051") drill and it was perfect for the 4-Inch Hot Knife blade. Personally, I wouldn't go any smaller because the crimped tip binds up easily, otherwise. If you don't have a 1.3mm drill I would recommend anything from 3/64" (0.0469") up to 1/16" (0.0625). With the 3/64" you might have to re-drill the hole to open it up slightly. Don't force the blade or you might wreck it." Be sure to test this on a scrap of wood before drilling into your guitar. Features a handy on/off switch right on the handle and comes with 10 feet of power cord. CAUTION: These tools are designed for cutting soft foam. DO NOT FORCE the blade downward. Gently push the blade downward into your predrilled hole. PAYMENTWe accept payment by any of the following methods: PayPal, Visa, Amex, Discover, MasterCard Buyers in California will be charged 8% sales tax. Please pay as soon as possible, as that will allow us to ship your item to you sooner! SHIPPING Packages are always insured. We ship within 2 business days (So if you order Monday, your order will ship by Wednesday). Weekends and holidays do not count as business days. We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay. USA - FedEx & USPS (United States Postal Service) Canada/Mexico - USPS (United States Postal Service) International Worldwide (Except Hong Kong or China) - USPS (United States Postal Service) International WARRANTY/RETURNS Limited Warranty & Limitation of Liability Information: This product is warranted for non-commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above. Return Policy: HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.. Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying. Crafters Guitar Neck Removal Kit Remove guitar necks for resetting without harmful steam! Our Crafters Hot Knives work great for releasing the adhesives used on guitar necks! The blades can be used to heat up the adhesive without the potential damage to the finish caused by steam from a mini iron. This kit includes two 4-Inch Hot Knives and two Crafters Power Supplies. Includes: 2 Hot Knives 2 Single-Temperature Crafters Power Supplies (220 volt input available) Printed Instructions Need help figuring out which size drillbit to use for the holes? One of our customers told us: "I used a 1.3mm (0.051") drill and it was perfect for the 4-Inch Hot Knife blade. Personally, I wouldn't go any smaller because the crimped tip binds up easily, otherwise. If you don't have a 1.3mm drill I would recommend anything from 3/64" (0.0469") up to 1/16" (0.0625). With the 3/64" you might have to re-drill the hole to open it up slightly. Don't force the blade or you might wreck it." Be sure to test this on a scrap of wood before drilling into your guitar. Features a handy on/off switch right on the handle and comes with 10 feet of power cord. CAUTION: These tools are designed for cutting soft foam. DO NOT FORCE the blade downward. Gently push the blade downward into your predrilled hole.

Price: 69.95 USD

Location: Lompoc, California

End Time: 2023-10-07T17:30:19.000Z

Shipping Cost: 0 USD