Description: You asked and we delivered! Metal drill guide, brighter graphics...the best just got BETTER! Thick wall brass inserts make this the best mold we have ever made! Offering unparalleled ease of use, increased drilling speed, superior precision, all while vastly lengthening the life of the mold. This truly is a major upgrade and will now be an exclusive standard feature on all Punk Fingerboard molds. Our printed veneer was just greatly improved as well, and has never been more bright, clear, or vivid. Look at the pictures, they are AMAZING and produce fingerboard graphics far superior than anything else on the market. You will be amazed at the quality, accuracy, and ease of our new mold design, along with the incredible color and clarity of our new graphic veneer, all for no additional cost!?! Punk Fingerboards does it again... You will receive: - New and Improved! 3D Printed fingerboard mold with brass drill guide. Size 145mm x 40mm x 40mm.- Shaper/template with centering pins. Size 98.3mm x 32.3mm.- Three new and improved pre-printed graphic veneer ply.- Two self stick board rails and one super thin, PRO foam grip tape.- Detailed video instructions here: Punk Fingerboards Mold Instructional Video The mold is a copy of the popular Berlinwood wide regular, with a slightly shorter wheelbase. The mold has thru hole locations done on CAD, so it can be used as a precision drill guide that perfectly matches up with the template, NEVER MIS-DRILL A BOARD AGAIN! The mold and shaper are printed from PLA+ (colors will vary) at 50% infill to ensure excellent stability and long life. The mold centering method does not use flimsy pins, but large interlocking tabs that will absolutely NOT break off. When used with a vice(recommended), this mold can make hundreds of boards. C-clamps work excellent as well, although we suggest using a 1/2"+ piece of wood between the clamp and the mold to evenly distribute the clamping pressure. The nose is marked on the mold and shaper for ease of use. The shaper is 25mm tall, and the perfect height to be used as a template for router shaping. The mold produces fingerboards with the following dimensions: Length: 98mmWidth: 32mm Wheelbase: 57mmNose: 21 degreesTail: 18 degreesConcave: 1.7mm The graphic on the bottom plies are not decals or heat transfers, they are permanent ink on bare wood and will NEVER peel, bubble or scrape off! Simply cut a piece of wax paper to fit over the graphic and glue it up in your mold as usual as the bottom ply. After trimming and shaping, finish the wood with a protective seal coat of your choice. These are natural pieces of maple, cut super thin. They will be sent in very flat condition, but some warping is normal if exposed to temperature and humidity fluctuations. If straightening is needed, very lightly moisten the piece, place between two layers of wax paper, and clamp between two hard, flat surfaces overnight (evenly distributed light pressure is sufficient). This veneer produces incredible results and very authentic looking fingerboards that wear just like real skateboards with graphics that never peel off! Buy with confidence, 100% money back guarantee, you will love this mold! Fast And Free Domestic Shipping. Worldwide shipping available. God bless and please check out our other auctions, including multiple styles of pre-printed graphic veneer for this mold.Punk Fingerboards Store (This is a tool, not a toy. Store in a dry, cool place. Do not store in a hot car or uninsulated garage, prolonged exposure to high heat can damage the mold. Do not overtighten your pressing device or use C-clamps without adding a board in between the mold and the clamp face. Apply even pressure when using this mold, certain types of vices that have excessive toe in can damage the mold. When finishing your boards, make sure to use a respirator approved for paint and lacquer fumes, a non approved respirator or dusk mask will not protect you.**THIS IS NOT A 100% INCLUSIVE FINGERBOARD KIT!...other things you will need not supplied: Veneer, wood glue, wax paper, clamps or vice, shaping tools, drill and bits, sandpaper, clear coat for finish, trucks, wheels, and hardware. All measurements are done manually, please allow variances of +/-1mm. Manufacturing irregularities common with 3D printers might exist, but do not effect the operation of the mold or the board rails. Ages 8+, CONTAINS SMALL PARTS, NOT FOR SMALL CHILDREN! Always wear appropriate protective gear when working with wood and wood finishing products, safety first! Flatface Blackriver Berlinwood Woob skateboard handboard toy tech deck Magic The Gathering Sticker Bomb Adult Swim Rick And Morty Squidbilly fire mold surf surfboard ramp rail grind curb box sport trucks wheels bushings bearings spitfire independent santa cruz powell peralta element gift Christmas)
Price: 49.99 USD
Location: Castle Rock, Colorado
End Time: 2024-09-26T19:55:50.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Size: 32mm
Year: 2019
Era: 2002-Now
Recommended Age Range: 8+
Type: Fingerboard
Brand: Punk Fingerboards
Country/Region of Manufacture: United States
Material: PLA+
Theme: Skateboarding