Kluberplex BEM 41-132 High-temperature and long-term grease 400g

Description: Kluberplex BEM 41-132 High-temperature and long-term grease 400g, Kluber Lubrication PN: 0202560591 Klüberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion. Benefits for your applicationLonger service life due to special wear additives for roller bearingsLess maintenanceVersatile grease due to wide operating temperature range and optimised oil release ApplicationKlüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between 70 and 110 °C.For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings, cylinder roller bearings, spherical roller bearingsFor-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section), textile machines (dry section), electric motors, hot air blowers drying ovens, air separators in the base materials industry, generators in wind power plantsRolling bearings in vehicle componentsClutch bearingsGenerator bearingsWater pump bearingsFluid fan bearings Technical specificationsLubricating greases -K, DIN 51825 in connection with DIN 51502KPHC2N-30LChemical composition, thickenerspecial lithium soapChemical composition, type of oilsynthetic hydrocarbon oilChemical composition, type of oilmineral oilLower service temperature-40 °C / -40 °FUpper service temperature150 °C / 302 °FColor spaceyellowDensity at 20 °Capprox. 0.90 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 120 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 14 mm²/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeDrop point, DIN ISO 2176, IP 396>= 250 °CSpeed factor (n x dm)approx. 1 000 000 mm/minOil separation, DIN 51817 N, after 7 d/40 °C<= 4 % by weightTesting of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000 min-1, axial load: 1500 N, temperature: 150 °C, service life F50:>= 100 hLow-temperature torque, IP 186, -40 °C, start<= 1 000 mNmLow-temperature torque, IP 186, -40 °C, running<= 200 mNmMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 months

Price: 57.23 USD

Location: Medford, Massachusetts

End Time: 2024-12-08T21:33:39.000Z

Shipping Cost: N/A USD