Description: Compatible with all exhaust systems (OEM or aftermarket) that retain the factory EVC control, the Macht Schnell Exhaust Valve Control (EVC) Module allows FULL user control of your exhaust system at the touch of a button. No clumsy key FOBs or additional equipment is needed - this is a 100% integrated solution and the first of its kind for current BMW models. BMW's Exhaust Control Valve is integrated at the exhaust system end pipe of the muffler. The exhaust flap reduces the noise level when the engine is idle and when the engine speed is close to idle. This reduces the outlet noise to improve comfort to the driver. The reduction on a stock exhaust system is ~8dB on the stock exhaust system. The Macht Schnell EVC Module supports the following features: - FULL control over Exhaust Valve Control at the touch of a button - on the fly or while stationary - User settings configurable by computer or while installed in vehicle from driver’s seat - Open/Close Exhaust Valve at YOUR command, or use BMW's factory profile for Exhaust Valve Control - Optional User-defined Valve Control Setting at startup (Open/Closed) or default to OEM operation - Quiet Cold Start in mornings compared to OEM operation - Integrated USB port for feature updates and configuration changes - InstallAID integrated LED confirms proper installation/operation while in use - Regulated internal power supply enters sleep mode to prevent unnecessary power drain while vehicle is parked - Easy 20-minute installation process with no wire cutting - No dealer visits or coding required after installation - Completely removable at any time Simply press the BC stalk for +2 seconds to change EVC modes. This is the feature that should have been standard from BMW. The Macht Schnell EVC module utilizes the instrument turn signal indicators and tachometer needle to give a visual confirmation of what particular mode you are in. Outside turn signals are not affected during operation and operate normally. Exhaust Valve Settings - “On Demand” Exhaust Valve Control. Exhaust valves can be operated while parked or while driving in following modes: Exhaust Valve open at all times Exhaust Valve Closed at all times Auto/OEM Mode (factory operation) EVC Memory Recall - Exhaust Valve can be set to remember last used position or revert to closed position upon engine start Active Sound Configuration - The option to configure the Active Sound is available in a variety of options for suit one’s needs. User has the option to deactivate Active Sound permanently, or only to operate within certain modes: for instance, while with the valve flap open, or only with valve flap closed. 1-Touch Comfort Window/Mirror Closing Upon Vehicle Locking - Comfort Closing will allow the windows and/or mirrors to 1-touch close upon locking automatically. This option can be configured to only close windows, only fold mirrors or close windows/fold mirrors together automatically. OBD2 Cycling - OBD2 Cycling is helpful when performing diagnostics or clearing engine codes on a programmable timed cycle. Also useful for those running off-road track setups. WARNING: Please note that certain aftermarket exhaust systems and/or accessories may not comply with applicable US (including California) laws and regulations, and may therefore be prohibited for use on highways or roads, or on roads or vehicles otherwise subject to emissions control requirements. California prohibits the use of any aftermarket exhaust system that modifies, removes or replaces original equipment catalysts, unless CARB has issued an Executive Order as to such part or system. Increased Halo Brightness - For those equipped with LED headlamps, the brightness level can be increased by approximately 40% for maximum intensity while driving Passive / Invisible mode Auto passive mode will allow factory electronic test equipment or other aftermarket devices to be utilized without causing irregularities in readouts or operation USB Port for easy setup / updates Module can be configured and updated using via PC Unique design features only to be found in Macht Schnell EVC Module Fully E13 tested and certified: E13 10R-02 4133 Ultra-low power standby mode (less than 0.1mA) InstallAID LED shows correct installation and status Intuitive Setup menu for easy customization Models Supported: BMW F2X 1-Series/M135 BMW F2X 2-Series/M235i/M240i BMW F3X 3-Series models BMW F3X 4-Series models 2015+ BMW F8X M3 & M4 2016+ BMW F87 M2 Return Claims We are dedicated to our customer’s 100% satisfaction. We will issue a refund/credit if you are not satisfied with your purchase and notify us within 14 days of product receipt. It must be returned in the original packaging and in saleable condition. Returned product is subject to a 20% restocking charge and must be returned freight prepaid. Damaged Shipments All of our shipments are 100% insured. It is very important to inspect your product thoroughly before accepting and signing for your carton. Packaging that appears in good condition does not guarantee that there is no “hidden” damage. The only way to be certain is to fully unpack and examine the contents carefully before signing. Legally, by applying your signature, you are signing a document stating that you have inspected the item and it is in good condition. We have no recourse when the item is signed for, any later claim for un-noticed (“hidden/concealed”) damage must be filed by you with USPS, UPS or FedEx. Many times it is common practice by UPS or FedEx to leave packages on your doorstep if no one is available for signature. Again, please inspect the package by fully unpacking and examining the contents. If you notice damage to the product during your inspection, please contact us immediately. Claims must by file within 7 days after receipt. Defective Merchandise All item sold are strictly followed by the manufacture warranty guideline only. If you receive a defective part upon delivery and it’s not due to shipping damages, please contact us and we will file a warranty claim with manufacture to have the issue resolved.
Price: 375.25 USD
Location: Walnut, California
End Time: 2024-02-25T19:39:37.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Manufacturer Part Number: MSL054
Brand: Macht Schnell