MALOSSI RC-ONE COMPLETE ENGINE CRANKCASE (FOR YAMAHA ENGINE) FOR SR STEALTH 50 2

Description: --> MALOSSI RC-ONE COMPLETE ENGINE CRANKCASE (FOR YAMAHA ENGINE) APRILIA SR STEALTH 50 2T LC (MINARELLI) RC-ONE COMPLETE ENGINE CRANKCASE (FOR YAMAHA ENGINE) Code : 5716668 Crankcase for all scooters that fit a Yamaha Minarelli LC 50 cc engine as original equipment Malossi has achieved the impossible, uniting the world of racing motors for scooters thanks to the RC-One Yamaha-Minarelli. Our technicians have designed the RC-One Yamaha-Minarelli as a platform for bringing together the technical solutions as well as the internal external dimensions with all RCOne Malossi models. The Malossi RC-One housings have been designed to be used only with 94cc Flanged Mount heating units with external studs. The generous pump housing dimensions are finally adequate enough for high capacity engine blocks. Malossi C-One uses the same transmission both for Piaggio and Yamaha/ Minarelli scooters, linking two worlds which have always been apart by enhancing and giving value to the best elements of both. RC-One for Yamaha has been designed to be entirely Plug & Play for all scooters equipped with 50cc Yamaha/Minarelli liquid-cooled motors: no modifications to the chassis are required, and the internal section can accept all products in the Malossi selection for the RC-One range, becoming a revolutionary solution for the development of racing components for ALL scooters. THE TECHNIQUE The base of the cylinder has been inclined by 10° compared to the original drive shaft axle - gears. This innovative development has allowed Malossi technicians to connect the motor attachments in front of the power unit, doing away with one of the biggest Achilles heels once of standard Yamaha/Minarelli motor housings once and for all. A modification underneath the saddle compartment. The base of the Yamaha RC-One has been designed to only house Malossi cylinders with flange mounts and external studs for the MHR Ø 52 Flanged Mount testa rossa family. The advantages of this solution open the door to the possibility of designing entirely unique cylinders. The reed valve mount has been significantly changed thanks to the latest 3D fluid dynamics simulation software, allowing Malossi technicians to find the ideal ratios and dimensions. The automatic mixer and mechanical water pump have been removed to reduce dispersion as much as possible. The possibility to perform a native install of a Malossi internal ignition rotor has been allowed. As for the bike itself, RC-One for Yamaha is designed exclusively for scooters with rear disc brakes fitted as standard, and is not designed for the alternative use of brake shoes. The interaxle spacing has been increased, with a consequential increased stability and precision when taking curves, whereas the gearbox housing has been reduced in size by overlapping the gear wheels. The increased interaxle spacing and the internal diameter means that the starter cover designed for Piaggio scooters is required. All RC-One for Yamaha housings are supplied complete with the components required for installation. Indeed, considering the notable technical differences when compared to standard units, Malossi has decided to include a reed valve, covers, and a special wheel pin in order to use the original rear wheel and make the RC-One perfectly interchangeable with Yamaha/Minarelli wheels and hubs. Another optional is the special rear mudguard to protect and keep the carburettor clean, now positioned at the rear. The new housings have been designed and built in Calderara di Reno at Malossi's new headquarters, one of the most advanced centres for research, development and production of special parts for motors and scooters. These parts were thought of and produced with one objective: to produce the most innovative racing components for scooters ever. Technical features: Crankcase pair, die-cast material in aluminum silicon alloy with high mechanical resistance. Crankcases inclusive of bearings 5.150 Kg. Crankshaft - clutch shaft wheelbase 270 mm. Crankshaft bearings 20 x 47 x 14. Oil seals FKM plus PTFE. Reed valve VL 18. Intake manifold X360 Ø 21 - 28 length 27. Cylinder stud bolts material: steel 8.8 UNI EN20898/1. Oversized cooling fluid connector: external Ø 18 mm - internal Ø 13,5 mm. Pinwheel. Wheel axle bearing 20 x 47 x 14. Roller gear cover size 16 x 22 x 12. NB: The picture is only indicative FOR MORE INFO PLEASE CONTACT US Compatible brand - FOR APRILIA Web price:AUD 701.94 Payments accepted Accepted payment methods :Bank transfer , Paypal , Credit cards Shipment To increase the service the WRS is a partner of the following couriers Express courier The package will travel under the responsibility of the purchaser and the seller will be free from any obligation from the time of delivery to the courier. International Shipping We ship from Italy to european countries through express courier. For shipping charges to other destination outside Europe, please send us an e-mail. Warranty The sale is assisted by guarantees for faults and defects required by law. Pursuant to Art. 53 of Legislative Decree 6 September 2005 n. 206, if the Costumer is a consumer he has the right to withdraw from the purchase contract for any reason and without providing explanations. To exercise this right, the costumer must send a written comunication within 10 working days from the date of receipt of the items. The comunication must be addressed, with previous warning, by mail. The items must be returned at the expense of the costumer within 10 days from the date of receipt of the items. We will provide to refund the full amount paid (excluding shipping costs) after having verified the integrity of the items. For written confirmation of all the contractual conditions as well as further information in the Article 53 of Legislative Decree 206/2005. READ THE LEGISLATIVE DECREE. Recess The policy “Money Back Guarantee” provides the replacement of the products present in the package and not in accordance with the description, different from the order or with a wrong colour. The refund of the amount is done on th simple request of the Costumer within 30 days of purchase. Born from the experience of professionals of the sector who have made their passion a work, selecting the most prestigious brands currently available on the market. WRS also provides technical advice to produce the best combinations for your motorbike. Italy official distibutors Only the best brand of the market Technical Supplier: Prestalia e-commerce solutions.

Price: 701.94 AUD

Location: Cattolica

End Time: 2024-11-15T20:22:41.000Z

Shipping Cost: 227.07 AUD