Description: Dual shaft NEMA-17 Stepper motor. 200 steps per revolution. 3.5V, 0.35A, 10 Ohm winding. 4-wire Bipolar. Gear cut into forward shaft (0.170" OD), protruding 0.622 from main face of motor (0.517" from shoulder) Back shaft 0.196" diameter, protruding 0.465" from rear face of motor, Length of motor 1.27". Including shafts: 2.30" Three #4-40 threaded posts on face of motor, 0.330" long. 4" wire, terminated in 0.1" x 4 connector with a epoxy-sealed bulkhead pass-through, located slightly under 1" from the motor.
Price: 4 USD
Location: Barstow, California
End Time: 2023-11-17T03:59:12.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Full Step Angle: 1.8° (200 Steps)
Actual Rated Input Voltage: 3.5
Modification Description: Connector and bulkhead seal
Rated Current per Phase: 0.35
Shaft Type: Geared Shaft
Shaft Diameter: 0.2 in
MPN: 17HS13-0404S
Modified Item: Yes
Brand: Value Hobby
Current Type: DC
Resistance per Phase: 10
Nominal Rated Input Voltage: 3 V
Country/Region of Manufacture: Japan
Wiring Configuration: 4-Wire Bipolar
