New Friedman / IR-D Dual Tube Preamp Friedman Preamp 0763815134192

Description: Description Achieve organic, rich sound and response in a compact, floor-standing size. The IR-D DUAL TUBE PREAMP (hereinafter referred to as IR-D) is based on the legendary vintage amp sound of the "JTM45", synonymous with British sound, but Dave Friedman has added some circuit arrangements to allow for flexible operation, resulting in an organic, rich sound and response reminiscent of the traditional Friedman Amp "Dirty Shirley" and "Twin Sister" head amps, all in a compact, floor-standing size. This dual tube preamp has two completely independent channels and an independent "BOOST function" for each channel. The authentic "Friedman Amp sound" achieved by operating the two pre-tubes (12AX7) installed in this unit at high voltage can be connected to the effect return of a guitar amp or a power amp and output from a guitar cabinet, and of course, you can use the "IR (Impulse Response)" with a rich variety of power amp simulation functions selected by Dave Friedman himself to directly connect to the PA system of a studio or live venue or a DAW environment at home. ■Floor-type tube preamp with completely independent "identical 2 channels" + boost function The IR-D, which consists of the same 2 channels, is a simple and exquisite "single channel amp" among Friedman Amp's products. It is designed based on the "Twin Sister", which is a 2-channel version of the "Dirty Shirley", which has a natural overdrive sound like when the amp volume is fully turned up from the British clean crunch sound of the 1960s, but each channel has an independent BOOST function that allows you to set the boost volume and gain level during guitar solos. ■Newly equipped with "2-Way Bright/Tight-Switch" and "3-Way Gain Structure Switch" The "Bright/Tight Switch" installed on each channel and the "Gain Structure Switch" that allows you to switch the gain range in three stages provide guitarists with a wide variety of sounds and tones. ●2-Way Bright/Tight-Switch ◯Up position: Sound mode with the tightest low end and emphasized high mids ◯Down position: Sound mode that is ideal for fat, single-coil guitars ●3-Way Gain Structure Switch ◯Up position: Highest gain sound mode ◯Center position: Lowest gain sound mode ◯Down position: Medium gain sound mode ●Low latency "Cabinet IR (Impulse Response)" installed The "IR Cabinet Simulation Function" is equipped with a power amp simulation (THUMP/PRESENCE) carefully selected by Dave Friedman to fully demonstrate the potential of the IR-D. You can load three IRs per channel from 13 factory IRs and additional third-party IRs, and you can monitor high-quality sounds like those recorded in a studio through the headphone output, or output them directly to a PA mixer or your home DAW environment. ●Supports presets in the dedicated editor By using the dedicated editor "FRIEDMAN IR-D EDITOR" (compatible with Mac and Windows), which can be downloaded for free, you can set MIDI, each switch and power amp simulation, select IRs, and upload third-party IRs. *THUMP and PRESENCE are only effective when using BALANCED OUT, and require operation from the editor. ●Equipped with high-quality effect loop (SEND/RETURN) The effect loop on the rear panel of the IR-D can be used for the following purposes in addition to connecting spatial effects. ●SEND terminal: IR Connects a preamp sound without cabinet simulation to the return of a guitar amp or an external power amp. ●RETURN terminal: Connect to the output of an external effector/preamp and use only the power amp/IR cabinet simulation function. ●Supports MIDI operation Up to 128 presets can be saved on the unit and in the dedicated editor. It can also be called up from an external MIDI controller and linked with a spatial multi-effector that supports MIDI operation with a single action. *The following controls can be saved and controlled using the MIDI function. ●CHANNEL SELECT ●BOOST ON/OFF ●IR SELECT ●THUMP AND PRESENCE – THREE WAY SWITCH PER CHANNEL ●EFFECTS LOOP ON/OFF ●BOOST LOCK ■Specifications ●All-tube HIGH-VOLTAGE preamp – DI ●2 x 12AX7 preamp tubes ●Two independent identical channels + boost ●Based on Friedman’s legendary Dirty Shirley/Twin Sister designs ●Power amp simulation with software editable Presence and Thump (per channel) ●Low latency Impulse Response cabinet simulation (bypassable) ●Three position CAB/IR select switch per channel (programmable via software) ●13 free Friedman IRs or load your own ●Boost Volume and Gain controls (per channel) ●Volume and Gain controls (per channel) ●Full EQ consisting of Bass, Middle, Treble (per channel) ●2-way Bright switch (per channel) ●3-way Structure switch (per channel) ●Three multi-function foot switches ●Ultra-transparent series FX loop (bypassable) ●TRS balanced output ●Headphone output ●MIDI 5 pin standard connector and USB MIDI ●USB software editor – powered by SYNERGY ●6 Foot USB2.0 A Male to B Male cable Included ●Dimensions (Including Knobs): 14cm (D) x 17cm (W) x 6.0cm (H) ●Weight: 762 g ■Accessories: Box, USB cable, AC adapter ※The Japanese instruction manual can be viewed by scanning the QR code included with the product. ※The image is a sample. ◆Condition: S: New　◆Accessories: Box, AC adapter, USB cable Payment Please pay within 4 days after purchase. Shipping Please refer to Shipping and handling.About other area, please ask me. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. * Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Price: 963.03 USD

Location: Jpan

End Time: 2024-08-18T08:09:18.000Z

Shipping Cost: 0 USD