PRESTIGE APS997A KEYLESS ENTRY REMOTE CAR STARTER KEY FOB ALARM OEM ELVATGB 07S

Description: Why purchase a recycled keyless entry remote transmitter? The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today! Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #. What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system. Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below. Compatible FCC ID#(s): FCC ID ELVATGB Alternate Spellings Part #(s) 08 08S Interchangeable Part #s: 08 08S 08SP 08SPR 07 07S 07SP 07SPR Dealer #(s) Button Count: 5: Lock, Unlock, 1, 2, trunk / key; LED Red (7 function LED, arming, arm, disarm, zone 1,2,3, & valet) Battery (installed): 1; CR2032 Frequency: 433.92MHZ / Modulation: AM / One-Way Transmitter LED Light Color: Red Circuit board #s: NTGD #s on Chip on board: Condition Notes: Pre-Owned ready to program to your compatible vehicle RKE system. Compatible Aftermarket Installed Systems: Made for the following Pursuit/Prestige systems:Type 4 SystemsAPS122EAPS255AAPS25NAPS510BAPS510NAPS55LRAPS55LRAAPS55TWAPS57AAPS57NAPS596APS596AAPS596NAPS597APS622EAPS650RSAPS686APS687APS687AAPS687NAPS786APS787APS787NAPS900APS901APS901NAPS905APS921APS997AAPS997NAPS998AS9050AS9055AS9055CAS9055TAS9233STJKRS1JKRS1TPRO9051PRO9051NPRO9056PRO9056NPRO9246APRO9256PRO9276APRO9276NPRO9556APRO9642APRO9664BPRO9649BPRO9649NPRO9775PRO9775TPRO9776APRO9776NPRO9800PRO9801APRO9801NPRO9900 Replaces the following Prestige/Pursuit remotes:09BT3OE3B4S723BPAPS99BT3SBCF434APS2K4SFLCF110PAPS2K4SCF50PAPS2K4SBCF50PROOE4BS40PROOE4BS41PRAPS2K4SBCF52PAPS2K4SBCF52APS2K4S5207SPRPROOE3S15PROOE3SAPSOE3B4SCF73P07S1BPRPROOE3S14APS99BT3SBCF435PA1BTXPRA1BTX2PA1BTX2PR07S3BPR07S3BPAA95BT3SPROOE4BS4108S08SPROE3B4S73OE3B4S71APS2K4S50PROOE4BS40PRAPS2K4SFLCF112PAPS95BT3SAVX1B4SS1BTXAA1BTXP PRO9776A PRO9801A PRO9276A APS997A APS787A APS687A APS596A APS510B APS596 APS597 APS686T APS686TC APS905 APS996A APS998 Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. Programming:Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.Turn the ignition key to the on position..Press and release the valet/programming switch 3 times (Siren Chirps).Press the Lock Button of each transmitter you want programmed until you hear a chirp from the horn or siren. Turn the ignition switch off.The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, you can use any unused button or combination of buttons not in use.In other words, to access option channel 5, 6, 7, you would do the following:From step 3 above:a.) Press and release the valet/programming button 4 additional times to get to channel 5, then press any unused transmitter button or button combination to program.b.) From a, press and release the valet/programming button 1 time to get to channel 6, then press any unused transmitter button or button combination to program.c.) From b, press and release the valet/programming button 1 time to get to channel 7, then press any unused transmitter button or button combination to program NOTE: Not all systems have channels above 3, check with your installation center for options your system may or may not have.NOTE: Certain systems have the ability to utilize channels 6 & 7 for driver priority programming. For driver priority, the vehicle must be equipped with this feature, and the optional feature must be set up and installed by your installation center. Once this feature is added when the unlock button of transmitter 1 is used, it will set driver 1 priority, and when the unlock button of transmitter 2 is used it will set driver 2 priority. In this situation, the unlock button can be programmed into two receiver channels, unlock, channel 2 and driver priority 6 or 7. In no other circumstance will the system allow a transmitter button to be programmed into 2 receiver channels at the same time.This unit's transmitters can control two vehicles with Prestige Remote Systems. To toggle primary or secondary vehicle press lock and trunk/key buttons simultaneously for 5 seconds.NOTE: Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are listed above and will require accessing your valet/programming switch. Programming Instructions: NOTE: It is important to remember that during the programming mode, each individual step must be completed within 15 seconds of the previous step. If the 15 second time limit expires between steps, the unit will automatically exit the program mode. This is indicated by a long chirp from the siren. Non alarm models will flash the parking lights only to confirm the transmitter code has been learned and stored. NOTE: Because the system may be capable of sounding a siren, the vehicle horn, or both, where the siren chirp is referenced below, the siren may chirp, the horn may beep, or both devices may sound. NOTE: Some systems are capable of single button programming, if your alarm module is capable of this feature, simply complete step 4 of these programming instructions for each transmitter you wish to control your system and exit the program mode by switching off the ignition key. TO PROGRAM ADDITIONAL TRANSMITTERS: 1. Enter the vehicle, and turn the ignition switch to the on position. 2. Press and release the valet push button switch three times. NOTE: Some systems may use a combination push-button LED switch. In these systems the push-button and the dash- mounted LED are one and the same. 3.The dash mounted LED will flash 1x, and the siren will chirp 1x, indicating that the system is ready to accept programming of channel #1 which is arm/lock, disarm/unlock/unlock 2, and panic functions. 4. Press and hold the lock or lock/unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 4 for each transmitter you wish to program". NOTE: If your transmitter button has the Lock/Unlock icon on one button, press and release the valet push button switch 2 times then move on to step #8. 5) Press and release the valet push button switch one time to advance to channel 2. The siren will chirp 2 times and the dash-mounted LED will Flash 2 times, indicating that the unit is ready to accept programming for channel # 2 which is only used for separate lock and unlock button transmitters, and is the disarm/unlock/unlock 2 and panic. 6) Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the Siren. "Repeat step 6 for each transmitter you wish to program". 7) Press and release the valet push button switch one time to advance to channel 3. The siren will chirp 3 times and the dash mounted LED will Flash 3 times, indicating that the unit is ready to accept programming for channel # 3 which is the trunk release/alternate output channel of the system. 8) Press and hold the trunk/key symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 8 for each transmitter you wish to program". 9) Press and release the valet push button switch one time to advance to channel 4 if so equipped. The siren will chirp 4 times and the dash mounted LED will Flash 4 times, indicating that the unit is ready to accept programming for channel # 4, optional device (where equipped) 10) Press and hold the Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 10 for each transmitter you wish to program". 11) Press and release the valet push button switch one time to advance to channel 5 if so equipped. The siren will chirp 5 times and the dash mounted LED will Flash 5 times, indicating that the unit is ready to accept programming for channel # 5 optional device (where equipped) 12) Press and hold the second Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 12 for each transmitter you wish to program". 13) Within 10 seconds, press and release the valet program switch one time. (Siren emits 6 short chirps indicating channel 6 has been entered) 14) Within 10 Seconds, Press and hold the unlock button, (or any unused button(s)), of the first transmitter you wish to control Channel 6 output, (Driver Priority 1) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 6 output, Driver Priority 1) 15) Within 10 seconds, press and release the valet program switch one time. (Siren emits 7 short chirps indicating channel 7 has been entered) 16) Within 10 Seconds, Press and hold the unlock button (or any unused button(s)) of the first transmitter you wish to control Channel 7 output, (Driver Priority 2) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 7 output, Driver Priority 2) NOTE: Channels 6 and 7 can be used as a separate output to control a function other than driver priority. Simply programming any unused transmitter button other than the unlock button will allow complete independent control of these outputs Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions: 1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems. 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following: i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote) ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?) 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems). 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems). 6. There are also many auto forums that you can go onto by just conducting a google search with your questions. 7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer. Normal 0 false false false EN-US X-NONE X-NONE

Price: 22.46 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-01-19T20:30:02.000Z

Shipping Cost: 6.96 USD

Product Images

PRESTIGE APS997A KEYLESS ENTRY REMOTE CAR STARTER KEY FOB ALARM OEM ELVATGB 07S

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Programming Required: See description below for details.

Custom Bundle: No

Remote Condition - Stock Photo: minimal scuffs / no cracks / faded button graphics

Fit 2: APS510B APS596 APS597 APS686T APS686TC APS905 APS996A APS9

Fit 1: PRO9776A PRO9801A PRO9276A APS997A APS787A APS687A APS596A

2-Way Paging: No

Unit Type: Unit

Battery: (1) CR 2032 CR2032

Features: Remote Start, Trunk Release, ready to program TESTED Working 100% Battery installed red LED, Keyless entry remote comes with DIY FREE Programming instructions, Keyless entry remote car key fob control transmitter starter clic, Vehicle Start keyfob controller beeper opener door keyfab fab, OEM FACTORY ORIGINAL AUTHENTIC with Battery installed

Stock #: 510

Unit Quantity: 1

Non-Domestic Product: No

Other Part Number: AX500 AX510 AX700 AX900 AX901 APS686T APS686TC

Warranty: 60 Day

Color: Black

Manufacturer Part Number: FCC ID ELVATGB ELVAToB fccid 08S keyfob starter keyfob key

Modified Item: No

California Prop 65 Warning: N/A

Brand: Prestige

Type: Wireless

Interchange Part Number: 08 08S 08SP 08SPR 07 07S 07SP 07SPR APS905 APS996A