GREY GOOSE

ProTek RC 1S 130C Low IR Si-Graphene + HV LiPo Battery (3.8V/8800mAh)

Description: New in package ProTek RC 1S 130C Low IR Si-Graphene + HV LiPo Battery (3.8V/8800mAh) w/4mm Connectors (ROAR Approved) The ProTek R/C 1S 130C Graphene + HV 8800mAh LiPo Battery is a great battery option for any racer looking for a lightweight, 1S battery. Weighing 155 grams, the 8800mAh capacity 1S HV offers huge current delivery that provides the punch needed for demanding 1S classes. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage - but Graphene + 130C LiPo batteries take that a step further with more power and lower internal resistance when compared to the previous ProTek LiHV Graphene packs! Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 3.7V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter and more capacity than standard 1S packs Delivers high current rates necessary for demanding 1S classes Improved power to weight ratio and a lower overall CG Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells 10C max charge rates - 1C charge rate recommended for longest life 3.8V nominal voltage 4mm bullets included NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 4.2V, these packs will still offer a noticeable advantage when compared to a standard LiPo pack. Battery Model 1S HV Shorty ROAR Approved Yes Type Silicon Graphene Voltage 3.8V nominal Capacity @7.4V 7900mAh Capacity @7.6V 8200mAh Weight 155g Connector Type 4mm Bullet Balance Connector N/A Number of Cells 1 Cell Configuration 1S2P Dimensions (WxLxH) 47x93x18.5mm Maximum Charge Rate 10C (88A) Burst Discharge 130C Watt Hour @7.6V 33.4 Wh Includes: (1) ProTek R/C Battery (2) 4mm Bullet Connectors (1) 2mm Balance Bullet Connector LITHIUM POLYMER SAFETY INFORMATION IMPORTANT: 1) DO NOT leave the battery in your model when charging 2) DO NOT leave unattended when charging 3) ALWAYS balance charge the battery 4) ALWAYS use a LiPo charging bag 5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) 6) YOU MUST not over discharge the Li-Poly battery pack 7) READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. Vehicle models vary. We DO NOT guarantee this will fit the vehicle specified in this listing!Verify that this item is appropriate for your vehicle. Consult your manual or vehicle manufacturer.Verify vehicle fit-ment before purchase.Returns will only be accepted on items that are returned in new, factory-sealed packaging. Used, damaged (unless damaged when it arrived to you), and opened items will not receive a full refund. Any and all warranty claims will be handled through the manufacturer directly.

Price: 59.99 USD

Location: Binghamton, New York

End Time: 2024-08-05T17:29:45.000Z

Shipping Cost: N/A USD

Product Images

ProTek RC 1S 130C Low IR Si-Graphene + HV LiPo Battery (3.8V/8800mAh)

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: ProTek

Capacity: 8800mAh

Part: Batteries-LiPo

Voltage: 3.8v

Number of Cells (S): 1s

MPN: PTK-510522

Chemical Composition: LiPo

For Vehicle Brand: Any Brand

Recommended

ProTek RC "TruTorque SL" Metric Ball End Hex Driver Set (4) Brand New!!
ProTek RC "TruTorque SL" Metric Ball End Hex Driver Set (4) Brand New!!

$48.99

View Details
ProTek RC 5x7mm Clutch Bell Shim (10) (0.1mm) [PTK-H-5905]
ProTek RC 5x7mm Clutch Bell Shim (10) (0.1mm) [PTK-H-5905]

$3.49

View Details
ProTek RC Multifunction LED Pit Light w/Wireless Charge Clock Date PTK-8298 New!
ProTek RC Multifunction LED Pit Light w/Wireless Charge Clock Date PTK-8298 New!

$39.99

View Details
PowerMadd Pro Tek ATV Windshield Headlight Cut Out with Standard Mount 24570
PowerMadd Pro Tek ATV Windshield Headlight Cut Out with Standard Mount 24570

$154.00

View Details
ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz) PTK-1570
ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz) PTK-1570

$12.00

View Details
ProTek RC 5x10x4mm Ceramic Metal Shielded "Speed" Bearing (2) [PTK-10025]
ProTek RC 5x10x4mm Ceramic Metal Shielded "Speed" Bearing (2) [PTK-10025]

$11.99

View Details
ProTek RC "Glitch Buster" Receiver Voltage Stabilizer [PTK-2950]
ProTek RC "Glitch Buster" Receiver Voltage Stabilizer [PTK-2950]

$4.89

View Details
ProTek RC 1/10 Buggy Tire Bag w/Storage Tubes
ProTek RC 1/10 Buggy Tire Bag w/Storage Tubes

$44.99

View Details
ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz) [PTK-1570]
ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz) [PTK-1570]

$9.99

View Details
Powermadd Cobra ATV Protek without Cut Quick Mount 24574
Powermadd Cobra ATV Protek without Cut Quick Mount 24574

$198.00

View Details