Seimitsu NOBI Supervision Joystick Lever PRO STD LSX-NOBI-01 Guide Set NT shaft

Description: Seimitsu NOBI Supervision Joystick Lever PRO Model / STD Model / PRO Model STD Guide Set / STD Model PRO Guide Set / NT shaft-NOBI / 2mm washer LSX-NOBI-01 This is a new joystick supervised by NOBI, a professional gamer who is always at the forefront of his field. The joystick is a specialized model for Tekken, which is actually used by NOBI. The NOBI models are equipped with a special "Bullet lever" that resembles a shift knob, rather than the usual lever ball.The shaft is plated with a shiny black finish.Unlike ordinary joysticks, the NOBI model has a special design in which the shaft and bullet lever do not rotate.The thickness of the shaft is almost the same as that of the LS-32, but the length has been adjusted for the NOBI model. [PRO model LSX-NOBI-01-PRO]The PRO model is equipped with a stiffer "NOBI spring" specially designed for NOBI.The mounting guide of the PRO model is a special shape of an unequal-sided octagon.The image color is green. [STD model LSX-NOBI-01-STD]STD model is equipped with special "STD spring" that are slightly softer than "NOBI spring".The mounting guide of the STD model is a special shape called irregular rectangle.The image color is red. [PRO model STD Guide Set LSX-NOBI-01-PRO_SET]LSX-NOBI-01-PRO with STD guides as a special setCustomers are responsible for replacing the guides themselves [STD model PRO Guide Set LSX-NOBI-01-STD_SET]LSX-NOBI-01-STD with PRO guides as a special setCustomers are responsible for replacing the guides themselves [NT shaft-NOBI]By replacing the shaft used for the NOBI models "LSX-NOBI-01-PRO/STD" and/or "LSXQ-NOBI-01", the shaft can be shortened from a maximum of 37mm to 6mm (minimum 31mm) in 3mm increments.Contents: 1 joint, 2 3mm washers, 1 NT-NOBI shaft, 1 E-ringRemarks: However, if the joint is not longer than 9mm, the durability value will be significantly reduced and is not guaranteed*If you wish to shorten the shaft further, please purchase the "Lever Joint for LS-32" (sold separately)*e-ring specification (1 spare e-ring included)*Since installation is not possible with models other than the NOBI model, please be sure to confirm the type of joystick you have before ordering [2mm washer for NT shaft]* Utility model registeredContents: 1 x 2mm washer for NT shaftThis washer is used to fine-tune the NT shaftCan be installed to all NT shaftsRecommended for those who want to make fine adjustments, such as when the genuine 3mm washer is slightly too longRemarks: However, if the joint is not longer than 9mm, the durability value will be significantly reduced and is not guaranteed Please note that disassemble the product is at your own risk.Please note that incorrect input due to special operations such as slap operation (like strong bouncing) is out of specification.

Price: 1.5 USD

Location: Tokyo

End Time: 2023-09-01T07:36:48.000Z

Shipping Cost: 25 USD