SR3D 3D Binaural microphone DIY Kit - ASMR - Field recording etc

Description: CHECK OUT OUR OTHER BINAURAL MICROPHONE LISTINGS! Register your serial number and leave us a review to get an extra year warranty!(Buyer pays return shipping) Price includes 20% VAT Low cost true 3D binaural microphone kit! Now with NEW GLOSSY EARS for better binaural capture!! Attractive GREEN SR3D Logo (we will update the photo soon) Please see the assembly video below to see how easy the setting up is - best if you have finger nails for installing the grommet! No need to fill the inside the tube, as we put cotton wool behind the capsules now, to stop sound leaks from behind the capsules. 2 SR3D ears 1 Microphone Tube 2 High quality microphones (Primo EM272 and REAN connectors with high quality Mogami cable) 1 microphone splitter 1 Grommet for microphone wires1 Grommet for microphone wire hole1 Stereo audio extension cable 1M This is a high quality DIY microphone that you can assemble yourself. It comes with holes pre-made in the tube and ears, and the microphones are a tight push fit into the ears, you can use your own microphone capsules, or use the supplied EM272's. We have been making the SR3D branded microphones since 2015 and are well known around the world as a quality 3D binaural microphone. If you Google SR3D Binaural microphone or search on YouTube, you will find many examples of ASMR content and a growing number of field recordings using the SR3D binaural microphone. The adapter nut is now assembled for you, and we have added an extra hole for the wire to come out of the bottom of the microphone, it has a soft silicone rubber stop that can be swapped to the rear hole if you want to use the different hole for the wire exit. To put the microphone together Push the audio jack through the hole in the ear and be sure that the mic enclosure top is flush with the ear canal entrance - see picture - this is very important for best performance for the binaural capture. The grommet is for the hole at the rear of the microphone, through which you should pass the mic wires before installing the grommet. It is a tight fit, but will go in. To assemble the microphone, simply fit one ear and pass through the wire through the grommet, then fit the last ear and pass the wire through the grommet and push the grommet in the hole. The ears are a firm push fit into the tube and won't fall out, but you can seal them in place with a little white silicone sealant for a neater finish. If you experience noise when connecting the microphone directly to a computer via the microphone input on your sound card, try running on battery power if you are using a laptop. Alternatively, you can use our USB adapter, which has stereo input and 24bit 48kHz capabilities. Please note that if you are plugging the microphone into a computer, the microphone input must be stereo, or you will need to use the USB adapter for stereo recording. This microphone weighs about 450g and uses plug-in-power from your recorder, computer, or camera with a stereo microphone socket. It comes with a 12-month return to base warranty, although the buyer pays return postage. Shipping to the UK is £10 which includes costs of packing and sent via 1st class Royal Mail post. Shipping to the rest of the world is £20 and is sent via Royal Mail International tracked service. International deliveries can take between 7 and 14 days, although the delivery time may vary depending on customs in your country, if you have not received your binaural capturing device after 21 days please get in touch. If you have any questions, you are welcome to message us between 9am and 10pm GMT You can contact us by phone +44 74 8888 3147

Price: 159.99 GBP

Location: Skelmersdale

End Time: 2024-08-27T17:39:09.000Z

Shipping Cost: 25.61 GBP