Studio Technologies Model-370A Intercom Beltpack

Description: Advanced performance and flexibility. The Model 370A Intercom Beltpack from Studio Technologies begins with the features offered by traditional 2-channel party-line intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple Model 370A units can be used in party-line (PL) intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies Model 5422 Dante Intercom Audio Engine. Alternately, units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.FeaturesDante audio-over-Ethernet technologyTwo independent talk and listen channelsIntegrated call functionSupports dynamic and electret microphones5-pin female XLR headset connectorSpecificationsPower Source:Power-over-Ethernet (PoE): class 1 (very low power, =3.84 watts) per IEEE® 802.3afNetwork Audio Technology:Type: Dante audio-over-EthernetAES67-2013 Support: yesDante Domain Manager (DDM) Support: yesBit Depth: up to 24Sample Rate: 48 kHzNumber of Transmitter (Output) Channels: 2Number of Receiver (Input) Channels: 2Dante Audio Flows: 4; 2 transmitter, 2 receiverNetwork Interface:Type: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet (PoE) supportedData Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)Connectors:Headset: 5-pin female XLREthernet: Neutrik NE8FBH etherCON RJ45 receptacleUSB: type A receptacle (located inside Model 370A's enclosure and used only for application firmware updates)Configuration: requires Studio Technologies STcontroller software application, version 1.06.00 and later (STcontroller is compatible with Windows version 7 and later)Microphone Input:Compatibility: dynamic or electret (low-voltage DC-powered) microphonesType: unbalancedElectric Microphone Power: 5 volts DC via 2.21 k resistor, selectable on/offGain, configured for dynamic microphones: 42 or 48 dB, selectable, ref. –60 dBu input to Dante output (–20 dBFS nominal)Gain, configured for electret microphones: 22 or 30 dB, selectable, ref. –60 dBu input to Dante output (–20 dBFS nominal)Frequency Response: 50 Hz to 10 kHz, –3 dBDistortion (THD+N):Dynamic Range: 75 dBHeadphone Output:Type: 2-channelCompatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headsets with nominal impedance of 50 ohms or greaterMaximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm loadFrequency Response: 20 Hz to 10 kHz, –3 dBDistortion (THD+N):Dynamic Range: >100 dBCall Function:Signaling Method: 20 kHz, ±800 Hz, within audio channelsCall Send Level: –20 dBFSCall Receive Level: –27 dBFS minimumAudio Channels: 2 talk, 2 listenMounting:Intended for portable applicationsContains integral belt clipOptional MBK-01 Mounting Bracket Kit allows Model 370A to be permanently mountedDimensions (Overall): 4.8" x 3.6" x 1.6"Weight: 0.6 pounds (0.3 kg)

Price: 595 USD

Location: Verona, Wisconsin

End Time: 2024-03-22T12:22:07.000Z

Shipping Cost: 0 USD