Description: Trianglelab Swiss CR-10S PRO Hotend Upgrade Kit for CR-10S PROAluminum CR10 Heatsink x 1Titanium Alloy Heat Break x 1CR10 Heat Block x 1Brass MK8 0.4mm Nozzle x 1* Compatible NTC 100K 3950 Thermistor & 104GT-2 Thermistor sensor Settings:1. Increase the retraction speed to > 80mm/s. Check firmware settings and, if needed, change it using "M203 E200" command.2. Increase the extruder acceleration. Check firmware settings and, if needed, change it using "M201 E9000" command.3. Reduce the retraction length as needed (like 2.5-4mm).4. Increase the nozzle temperature by 5-10 degrees.5. Do not install the 2 screws for support the heat block like the stock hotend on the CR-10 printer.6. Make sure that there is no gap between the heatsink and the heat break. FAST SHIPPING!
Price: 45 USD
Location: Seneca, South Carolina
End Time: 2024-08-19T23:13:17.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Trianglelab
Type: Hotend
Filament Diameter: 1.75 mm
Compatible Model: For Creality 3D CR-10S
