TrolMaster Parts

Description: Have a few different parts available: TrolMaster Program Device Station 240V (DSP-2) -The TrolMaster DSP-2 program device station module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-X. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2 TrolMaster Hydro-X Sun System Light Adapter (LMA-13S) - TrolMaster's Hydro-X system can control most of horticulture lighting fixtures sold on the market today. Most light manufactures provide the ability to control their lighting systems using what is known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makers several types of lighting adapters (LMA units) that allow the Hydro-X to control lights using their low-volt control option. This Lighting Control Adapter S (LMA-13S) is specially designed for controlling Sunsystem ballast (except SunSystem LEC 630) TrolMaster Aqua-x Inline EC & Temp Probe Heavy Duty (PCT-2) - PCT-2 is an inline EC/Temp Sensor designed specially for the Aqua-X Irrigation Control System. This probe has a single cylinder that allow direct connection to the input terminal of the AMP-2 Sensor board. This will allow for almost instant readings that will show on your LCD screen of the Aqua-X Controller. Helping you monitor the EC level and water temperature. TrolMaster RJ12 to Threaded Waterproof Connector Converter Cable (ECS-3) - The ECS-3 provides a 5/8" diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4ft RJ12 Threaded Waterproof Connector cable. TrolMaster Low Volt Control Station (DSV-1) - The TrolMaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module. Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate. TrolMaster Aqua-X Touch Spot + T Split Extension Cable (TSS-1) - Additional detector can be added to the WD-1 by using the TSS-1 & T-splitter in the water detector set. It comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module. This is useful when trying to monitor for water spills or flooding, or to monitor water run-off at multiple locations. Trolmaster Hydro-X Water Detector + Touch Spot For Flood Alert (WD-2) - A water detector is an electronic device that is specially designed to detect the presence of water and provide an alert in time to allow the prevention of water leakage in the Hydro-X Irrigation Control System. The default function of Water Detector (WD-2) is for leak detection and there is a triangle symbol shown on the LCD display of the Hydro-X Controller. When the WD-2 detects water leakage, it will send alarm message to your smartphone one minute later. You can also check the alarm message is the Hydro-X Controller. Two or more water detectors (up to 8pc for each system) can be linked together in a 'daisy chain', expanding the leak detection monitoring area. ** WE CANNOT SHIP TO ALASKA AND HAWAII ** * ALL SALES ARE FINAL *

Price: 20 USD

Location: Grants Pass, Oregon

End Time: 2024-09-25T17:47:38.000Z

Shipping Cost: N/A USD