Walking Foot With Stitch in the Ditch, Open Toe Soles For Low Shank Machines

Description: New Style Walking Foot With Two Quilting Guides and Three Soles in a convenient plastic box. Fits Most Low Shank Sewing Machines Janome, Brother, Babylock, Juki, Elna, Singer, White, Kenmore, Riccar, Simplicty, and many other low shank machines. 3 interchangeable soles are included: -One closed toe for general sewing, open toe for quilting sewing, and one with center guide for stitch-in-the-ditch soles. This walking foot is wonderful for fabrics that stretch or slip easily, such as velvet or corduroy. The foot has a set of upper rubberized feed to help feed multiple layers evenly without shifting. This walking foot comes with three easily interchangeable soles, a general sewing closed toe sole and an open toe sole for quilting plus one sole with central guide for stitching in the ditch and edge stitching. Additionally, it comes with two seam guide both right and left to help you can sew accurately resulting in consistent stitching and perfectly matched patterns. To change the sole, just use screwdriver supplied to open the fork that holds the sole so that the sole will release. Then align the holes of the replacement sole so both sides are so both sides are inserted in the hole, 2 holes on the left, and one the right. To attach seam guide, place the U-shaped piece behind the foot and line up with holes on the foot. Insert seam guide into U -shaped piece and through foot, insert right guide into right side of the foot. left guide into left side of the foot. Push guide through to the desired width. Tighten large screw on the top of U-shaped piece and against the metal hole behind. Make sure screw is tight so guide does not move when sewing. packed in an strong, clear elegant plastic box for convenient storage Part #: P90130MADE IN TAIWAN

Price: 42.9 USD

Location: Salem, Oregon

End Time: 2024-07-02T18:01:43.000Z

Shipping Cost: 4.9 USD